Changes in stm32f746-disco_defconfig

5dc4dfd2a94744a6df0d3f84c98b30d1962d4beb - configs: Resync with savedefconfig

Mon, 28 Aug 2017 11:16:32 +0000

configs: Resync with savedefconfigRsync all defconfig files using moveconfig.pySigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

88663126a009d0c354d832e005a5b3b511e5c7fb - configs: Resync with savedefconfig

Mon, 14 Aug 2017 23:58:53 +0000

configs: Resync with savedefconfigRsync all defconfig files using moveconfig.pySigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

5abc1a4523a5509ce37bc3ec818b660a48f4eafd - common: Move CONFIG_BOOTARGS to Kconfig

Mon, 14 Aug 2017 17:22:17 +0000

common: Move CONFIG_BOOTARGS to KconfigAlso introduce CONFIG_USE_BOOTARGS option so we can control ifCONFIG_BOOTARGS defined at all.Signed-off-by: Sam Protsenko [trini: Resync r8a779[56]_ulcb, various ls10xx targets]Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

84e9dcc120c59942cc35a1e229e856ce556d7ca2 - serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig

Wed, 26 Jul 2017 13:48:39 +0000

serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to KconfigAdd CONFIG_STM32X7_SERIAL as a Kconfig option.Signed-off-by: Patrice Chotard Reviewed-by: Vikas Manocha List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

2be296538e2e9d2893dc495b3fc8f9f6acb1454c - Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

Mon, 24 Jul 2017 03:19:39 +0000

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigThis converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHEREIn fact this already exists for sunxi as a 'choice' config. However notall the choices are available in Kconfig yet so we cannot use that. Itwould lead to more than one option being set.In addition, one purpose of this series is to allow the environment to bestored in more than one place. So the existing choice is converted to anormal config allowing each option to be set independently.There are not many opportunities for Kconfig updates to reduce the size ofthis patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMCAnd then manual updates. This is because for CHAIN_OF_TRUST boards theycan only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logicnow.Signed-off-by: Simon Glass Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

fb82fe385173fdf7b55e50e4f343ae37a41cdbaa - configs: Resync defconfigs

Mon, 19 Jun 2017 13:47:40 +0000

configs: Resync defconfigsSigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

b97476965bf292c13074e01de4bd39253de0ef66 - stm32: stm32f7: add spl build support

Sun, 28 May 2017 19:55:10 +0000

stm32: stm32f7: add spl build supportThis commit supports booting from stm32 internal nor flash. spl U-Bootinitializes the sdram memory, copies next image (e.g. standard U-Boot)to sdram & then jumps to entry point.Here are the flash memory addresses for U-Boot-spl & standard U-Boot: - spl U-Boot : 0x0800_0000 - standard U-Boot : 0x0800_8000To compile u-boot without spl: Remove SUPPORT_SPL configuration(arch/arm/mach-stm32/Kconfig)Signed-off-by: Vikas Manocha [trini: Rework Kconfig logic a bit]Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

ea744fca0e36e085947ad32358da60377d1966b6 - stm32f7: remove duplicate configs

Sun, 28 May 2017 19:55:09 +0000

stm32f7: remove duplicate configsSigned-off-by: Vikas Manocha List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

4f66e09bb9fbc47b73f67c3cc08ee2663e8fcdb1 - Merge branch 'master' of git://git.denx.de/u-boot

Tue, 09 May 2017 16:03:44 +0000

Merge branch 'master' of git://git.denx.de/u-bootSigned-off-by: Stefano Babic List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

280057bd7dd623420b2d8b383fe5bbe26820bc93 - stm32f7: use stm32f7 gpio driver supporting driver model

Mon, 10 Apr 2017 22:02:59 +0000

stm32f7: use stm32f7 gpio driver supporting driver modelWith this gpio driver supporting DM, there is no need to enable clocksfor different gpios (for pin muxing) in the board specific code.Need to increase the allocatable area required before relocation from 0x400 to0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree.Signed-off-by: Vikas Manocha cc: Christophe KERELLO Reviewed-by: Simon Glass List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

bf1ae4426b89bd8b3e036e012acc4bc88fec4c6e - stm32f7: sdram: move sdram driver code to ram drivers area

Mon, 10 Apr 2017 22:02:51 +0000

stm32f7: sdram: move sdram driver code to ram drivers areaSigned-off-by: Vikas Manocha cc: Christophe KERELLO List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

2681e78a5ee0e3d6d45abc195c81d1c527fcea0b - configs: Re-sync

Mon, 01 May 2017 15:41:11 +0000

configs: Re-syncSigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

94d53084120bd977249e78ae4738cc28e62d276d - PINCTRL: stm32f7: add pin control driver

Sun, 12 Feb 2017 18:25:49 +0000

PINCTRL: stm32f7: add pin control driverThis driver uses the same pin control binding as that of linux, bindingdocument of this patch is copied from linux. One addition done is forGPIO input and output mode configuration which was missing.Signed-off-by: Vikas Manocha Reviewed-by: Simon Glass List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

712f99a5ddc404f8c6eac481cfe19f82ca2ecb4f - clk: stm32f7: add clock driver for stm32f7 family

Sun, 12 Feb 2017 18:25:45 +0000

clk: stm32f7: add clock driver for stm32f7 familyadd basic clock driver support for stm32f7 to enable clocks required bythe peripherals.Signed-off-by: Vikas Manocha Reviewed-by: Simon Glass List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

8728c97eff5bd95f58320f886ae305f17931a374 - configs: Re-sync

Mon, 13 Mar 2017 17:48:42 +0000

configs: Re-syncSigned-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

e856bdcfb49291d30b19603fc101bea096c48196 - flash: complete CONFIG_SYS_NO_FLASH move with renaming

Sat, 11 Feb 2017 13:43:54 +0000

flash: complete CONFIG_SYS_NO_FLASH move with renamingWe repeated partial moves for CONFIG_SYS_NO_FLASH, but this isnot completed. Finish this work by the tool.During this move, let's rename it to CONFIG_MTD_NOR_FLASH.Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic willmake the code more readable. Besides, negative meaning symbols donot fit in obj-$(CONFIG_...) style Makefiles.This commit was created as follows:[1] Edit "default n" to "default y" in the config entry in common/Kconfig.[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"[3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'[4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'[5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.hSigned-off-by: Masahiro Yamada List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

d4363baada1505e126fc75c292f17903ab9c9e3a - ARM: SPI: stm32: add stm32f746 qspi driver

Sun, 22 Jan 2017 15:04:30 +0000

ARM: SPI: stm32: add stm32f746 qspi driverThis patch adds support for the QSPI IP found in stm32f7 devices.Signed-off-by: Michael Kurz List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

b20b70fcc027a173b61950e9bb4a736557d19697 - net: stm32: add designware mac glue code for stm32

Sun, 22 Jan 2017 15:04:27 +0000

net: stm32: add designware mac glue code for stm32This patch adds glue code required for enabling the designwaremac on stm32f7 devices.Signed-off-by: Michael Kurz Acked-by: Joe Hershberger List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

b1a8de7e07a6b40e7c5920566836862cd07df08a - ARM: DTS: stm32: add stm32f746-disco device tree files

Sun, 22 Jan 2017 15:04:23 +0000

ARM: DTS: stm32: add stm32f746-disco device tree filesThis patch adds the DTS source files needed for stm32f746-disco boardThe files are based on the stm32f429/469 files from current linuxkernel.Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi"Signed-off-by: Michael Kurz Acked-by: Vikas MANOCHA List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig

a5d67547dd9c7a527dfda1967010e703a22441ff - Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

Mon, 23 Jan 2017 20:31:20 +0000

Convert CONFIG_BOARD_EARLY_INIT_F to KconfigThis converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_FSigned-off-by: Simon Glass List of files: /rk3399_rockchip-uboot/configs/stm32f746-disco_defconfig