a79854a90f7297ddfda2114c867fd62643fa6e3a - board: arm: convert makefiles to Kbuild style

Mon, 21 Oct 2013 02:53:37 +0000

board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada Cc: Albert ARIBAUD Cc: Andreas Bießmann Cc: Stefano Babic Cc: Prafulla Wadaskar Cc: Minkyu Kang Cc: Vipin Kumar Cc: Tom Warren Cc: Tom Rini List of files: /rk3399_rockchip-uboot/board/raidsonic/ib62x0/Makefile

326ea986ac150acdc7656d57fca647db80b50158 - Merge git://git.denx.de/u-boot-arm

Wed, 31 Jul 2013 09:30:38 +0000

Merge git://git.denx.de/u-boot-armConflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.hSigned-off-by: Stefano Babic List of files: /rk3399_rockchip-uboot/board/raidsonic/ib62x0/Makefile

8b485ba12b0defa0c4ed3559789250238f8331a8 - Merge branch 'u-boot/master' into u-boot-arm/master

Thu, 25 Jul 2013 15:57:46 +0000

Merge branch 'u-boot/master' into u-boot-arm/master List of files: /rk3399_rockchip-uboot/board/raidsonic/ib62x0/Makefile

1a4596601fd395f3afb8f82f3f840c5e00bdd57a - Add GPL-2.0+ SPDX-License-Identifier to source files

Mon, 08 Jul 2013 07:37:19 +0000

Add GPL-2.0+ SPDX-License-Identifier to source filesSigned-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c]Signed-off-by: Tom Rini List of files: /rk3399_rockchip-uboot/board/raidsonic/ib62x0/Makefile

ee3a55fdf00b54391e406217e53674449e70d78b - Merge branch 'master' of git://git.denx.de/u-boot-arm

Sun, 20 May 2012 19:31:26 +0000

Merge branch 'master' of git://git.denx.de/u-boot-arm* 'master' of git://git.denx.de/u-boot-arm: (167 commits) OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT ARM: omap3: Set SPL stack size to 8KB, image to 54KB. arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree omap4: do not enable auxiliary cores omap4: do not enable fs-usb module omap4: panda: disable uart2 pads during boot igep00x0: change mpurate from 500 to auto igep00x0: enable the use of a plain text file tegra2: trivially enable 13 mhz crystal frequency tegra: Enable keyboard for Seaboard tegra: Switch on console mux and use environment for console tegra: Add tegra keyboard driver tegra: fdt: Add keyboard definitions for Seaboard tegra: fdt: Add keyboard controller definition tegra: Add keyboard support to funcmux input: Add support for keyboard matrix decoding from an fdt input: Add generic keyboard input handler input: Add linux/input.h for key code support fdt: Add fdtdec functions to read byte array tegra: Enable LP0 on Seaboard tegra: fdt: Add EMC data for Tegra2 Seaboard tegra: i2c: Add function to find DVC bus fdt: tegra: Add EMC node to device tree tegra: Add EMC settings for Seaboard tegra: Turn off power detect in board init tegra: Set up warmboot code on Nvidia boards tegra: Setup PMC scratch info from ap20 setup tegra: Add warmboot implementation tegra: Set up PMU for Nvidia boards tegra: Add PMU to manage power supplies tegra: Add EMC support for optimal memory timings tegra: Add header file for APB_MISC register tegra: Add tegra_get_chip_type() to detect SKU tegra: Add flow, gp_padctl, fuse, sdram headers tegra: Add crypto library for warmboot code tegra: Add functions to access low-level Osc/PLL details tegra: Move ap20.h header into arch location Add AES crypto library i2c: Add TPS6586X driver Add abs() macro to return absolute value fdt: Add function to return next compatible subnode fdt: Add function to locate an array in the device tree i.MX28: Avoid redefining serial_put[cs]() i.MX28: Check if WP detection is implemented at all i.MX28: Add battery boot components to SPL i.MX28: Reorder battery status functions in SPL i.MX28: Add LRADC init to i.MX28 SPL i.MX28: Add LRADC register definitions i.MX28: Shut down the LCD controller before reset i.MX28: Add LCDIF register definitions i.MX28: Implement boot pads sampling and reporting i.MX28: Improve passing of data from SPL to U-Boot M28EVK: Add SD update command M28EVK: Implement support for new board V2.0 FEC: Abstract out register setup MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged i.MX28: Add delay after CPU bypass is cleared spi: mxs: Allow other chip selects to work spi: mxs: Introduce spi_cs_is_valid() mx53loco: Remove unneeded gpio_set_value() mx53loco: Add CONFIG_REVISION_TAG mx53loco: Turn on VUSB regulator mx53loco: Add mc34708 support and set mx53 frequency at 1GHz pmic: dialog: Avoid name conflicts imx: Add u-boot.imx as target for ARM9 i.MX SOCs i.MX2: Include asm/types.h in arch-mx25/imx-regs.h imx: usb: There is no such register i.MX25: usb: Set PORTSCx register imx: nand: Support flash based BBT i.MX25: This architecture has a GPIO4 too i.MX25: esdhc: Add mxc_get_clock infrastructure i.MX6: mx6q_sabrelite: add SATA bindings i.MX6: add enable_sata_clock() i.MX6: Add ANATOP regulator init mx28evk: add NAND support USB: ehci-mx6: Fix broken IO access M28: Scan only first 512 MB of DRAM to avoid memory wraparound Revert "i.MX28: Enable additional DRAM address bits" M28: Enable FDT support mx53loco: Add support for 1GHz operation for DA9053-based boards mx53loco: Allow to print CPU information at a later stage mx5: Add clock config interface imx-common: Factor out get_ahb_clk() i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow mx31pdk: Allow booting a zImage kernel mx6qarm2: Allow booting a zImage kernel mx6qsabrelite: Allow booting a zImage kernel mx28evk: Allow booting a zImage kernel m28evk: Allow to booting a dt kernel mx28evk: Allow to booting a dt kernel mx6qsabrelite: No need to set the direction for GPIO3_23 again pmic: Add support for the Dialog DA9053 PMIC MX53: mx53loco: Add SATA support MX53: Add support to ESG ima3 board SATA: add driver for MX5 / MX6 SOCs MX53: add function to set SATA clock to internal SATA: check for return value from sata functions MX5: Add definitions for SATA controller NET: fec_mxc.c: Add a way to disable auto negotiation Define UART4 and UART5 base addresses EXYNOS: Change bits per pixel value proper for u-boot. EXYNOS: support TRATS board display function LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI EXYNOS: support EXYNOS MIPI DSI interface driver. EXYNOS: support EXYNOS framebuffer and FIMD display drivers. LCD: add data structure for EXYNOS display driver EXYNOS: add LCD and MIPI DSI clock interface. EXYNOS: definitions of system resgister and power management registers. SMDK5250: fix compiler warning misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998 misc:pmic:max8997 MAX8997 support for PMIC driver TRATS: modify the trats's configuration ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT cm-t35: add I2C multi-bus support include/configs: Remove CONFIG_SYS_64BIT_STRTOUL include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF omap3: Introduce weak misc_init_r omap730p2: Remove empty misc_init_r omap5912osk: Remove empty misc_init_r omap4+: Remove CONFIG_ARCH_CPU_INIT omap4: Remove CONFIG_SYS_MMC_SET_DEV OMAP3: pandora: drop console kernel argument OMAP3: pandora: revise GPIO configuration ... List of files: /rk3399_rockchip-uboot/board/raidsonic/ib62x0/Makefile

e5841e12114fbc55dcc2b409ba5cd09081f33483 - kirkwood: add NAS62x0 board support

Tue, 17 Apr 2012 09:22:17 +0000

kirkwood: add NAS62x0 board supportAdd support for new boards RaidSonic ICY BOX NAS6210 and NAS6220.NAS6210 has 1 SATA and 1 eSATA port while NAS6220 has 2 SATA ports.More information about the boards can be found here:http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7036http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7515Signed-off-by: Luka Perkov Signed-off-by: Gerald Kerma Signed-off-by: Simon Baatz List of files: /rk3399_rockchip-uboot/board/raidsonic/ib62x0/Makefile

Changes in Makefile

a79854a90f7297ddfda2114c867fd62643fa6e3a - board: arm: convert makefiles to Kbuild style

326ea986ac150acdc7656d57fca647db80b50158 - Merge git://git.denx.de/u-boot-arm

8b485ba12b0defa0c4ed3559789250238f8331a8 - Merge branch 'u-boot/master' into u-boot-arm/master

1a4596601fd395f3afb8f82f3f840c5e00bdd57a - Add GPL-2.0+ SPDX-License-Identifier to source files

ee3a55fdf00b54391e406217e53674449e70d78b - Merge branch 'master' of git://git.denx.de/u-boot-arm

e5841e12114fbc55dcc2b409ba5cd09081f33483 - kirkwood: add NAS62x0 board support