// //****************************************************************************** // MStar Software // Copyright (c) 2010 - 2012 MStar Semiconductor, Inc. All rights reserved. // All software, firmware and related documentation herein ("MStar Software") are // intellectual property of MStar Semiconductor, Inc. ("MStar") and protected by // law, including, but not limited to, copyright law and international treaties. // Any use, modification, reproduction, retransmission, or republication of all // or part of MStar Software is expressly prohibited, unless prior written // permission has been granted by MStar. // // By accessing, browsing and/or using MStar Software, you acknowledge that you // have read, understood, and agree, to be bound by below terms ("Terms") and to // comply with all applicable laws and regulations: // // 1. MStar shall retain any and all right, ownership and interest to MStar // Software and any modification/derivatives thereof. // No right, ownership, or interest to MStar Software and any // modification/derivatives thereof is transferred to you under Terms. // // 2. You understand that MStar Software might include, incorporate or be // supplied together with third party`s software and the use of MStar // Software may require additional licenses from third parties. // Therefore, you hereby agree it is your sole responsibility to separately // obtain any and all third party right and license necessary for your use of // such third party`s software. // // 3. MStar Software and any modification/derivatives thereof shall be deemed as // MStar`s confidential information and you agree to keep MStar`s // confidential information in strictest confidence and not disclose to any // third party. // // 4. MStar Software is provided on an "AS IS" basis without warranties of any // kind. Any warranties are hereby expressly disclaimed by MStar, including // without limitation, any warranties of merchantability, non-infringement of // intellectual property rights, fitness for a particular purpose, error free // and in conformity with any international standard. You agree to waive any // claim against MStar for any loss, damage, cost or expense that you may // incur related to your use of MStar Software. // In no event shall MStar be liable for any direct, indirect, incidental or // consequential damages, including without limitation, lost of profit or // revenues, lost or damage of data, and unauthorized system use. // You agree that this Section 4 shall still apply without being affected // even if MStar Software has been modified by MStar in accordance with your // request or instruction for your use, except otherwise agreed by both // parties in writing. // // 5. If requested, MStar may from time to time provide technical supports or // services in relation with MStar Software to you for your use of // MStar Software in conjunction with your or your customer`s product // ("Services"). // You understand and agree that, except otherwise agreed by both parties in // writing, Services are provided on an "AS IS" basis and the warranty // disclaimer set forth in Section 4 above shall apply. // // 6. Nothing contained herein shall be construed as by implication, estoppels // or otherwise: // (a) conferring any license or right to use MStar name, trademark, service // mark, symbol or any other identification; // (b) obligating MStar or any of its affiliates to furnish any person, // including without limitation, you and your customers, any assistance // of any kind whatsoever, or any information; or // (c) conferring any license or right under any intellectual property right. // // 7. These terms shall be governed by and construed in accordance with the laws // of Taiwan, R.O.C., excluding its conflict of law rules. // Any and all dispute arising out hereof or related hereto shall be finally // settled by arbitration referred to the Chinese Arbitration Association, // Taipei in accordance with the ROC Arbitration Law and the Arbitration // Rules of the Association by three (3) arbitrators appointed in accordance // with the said Rules. // The place of arbitration shall be in Taipei, Taiwan and the language shall // be English. // The arbitration award shall be final and binding to both parties. // //****************************************************************************** // //////////////////////////////////////////////////////////////////////////////// // // Copyright (c) 2008-2009 MStar Semiconductor, Inc. // All rights reserved. // // Unless otherwise stipulated in writing, any and all information contained // herein regardless in any format shall remain the sole proprietary of // MStar Semiconductor Inc. and be kept in strict confidence // ("MStar Confidential Information") by the recipient. // Any unauthorized act including without limitation unauthorized disclosure, // copying, use, reproduction, sale, distribution, modification, disassembling, // reverse engineering and compiling of the contents of MStar Confidential // Information is unlawful and strictly prohibited. MStar hereby reserves the // rights to any and all damages, losses, costs and expenses resulting therefrom. // //////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////////////// /// /// @file drvDMD_common.h /// @brief DVBC Driver Interface /// @author MStar Semiconductor Inc. /////////////////////////////////////////////////////////////////////////////////////////////////// /*! \defgroup Demod Demod interface Peripheral functions are controlled by each DEMOD standard Features - Registers read/write. - I2C, RF/IF, TS and SSPI control. ATSC Interface brief ATSC is the demodulator of supporting 8VSB and J83B standard. Receive RF signal from Tuner and transmit demodulated data to TS module. Features - Support 8VSB and J83B standard. - Pass A74 SPEC. - Pass the field stream. ATSC Block Diagram: \n \image html drvDMD_ATSC_pic01.png Operation Code Flow: \n -# Initialize ATSC parameters and load DEMOD FW -# Enable DEMOD state machine -# Monitor lock status DTMB interface brief DTMB is the demodulator of supporting DTMB(6/7/8/9M) standard. Receive RF signal from Tuner and transmit demodulated data to TS module. Features - Support DTMB(6/7/8/9M) standard. - Pass CHINA SPEC. - Pass the field stream. DTMB Block Diagram: \n \image html drvDMD_DTMB_pic01.png Operation Code Flow: \n -# Initialize DTMB parameters and load DEMOD FW -# Enable DEMOD state machine -# Monitor lock status *! \defgroup COMMON COMMON interface (drvDMD_common.h) * \ingroup Demod *! \defgroup COMMON_BASIC COMMON basic control * \ingroup COMMON */ #ifndef _DRV_DMD_COMMON_H_ #define _DRV_DMD_COMMON_H_ #ifdef __cplusplus extern "C" { #endif //------------------------------------------------------------------------------------------------- // Driver Capability //------------------------------------------------------------------------------------------------- //------------------------------------------------------------------------------------------------- // Macro and Define //------------------------------------------------------------------------------------------------- #define USE_UTOPIA2P0 //------------------------------------------------------------------------------------------------- // Type and Structure //------------------------------------------------------------------------------------------------- typedef enum { _QPSK = 0x0, _16QAM = 0x1, _64QAM = 0x2, _UNKNOW_QAM = 0xff, }DMD_CONSTEL; typedef enum { _CR1Y2 = 0x0, _CR2Y3 = 0x1, _CR3Y4 = 0x2, _CR5Y6 = 0x3, _CR7Y8 = 0x4, _UNKNOW_CR = 0xff, }DMD_CODERATE; typedef struct { float power_db; MS_U8 sar3_val; }DMD_RFAGC_SSI; typedef struct { float power_db; MS_U8 agc_val; }DMD_IFAGC_SSI; typedef struct { float attn_db; MS_U8 agc_err; }DMD_IFAGC_ERR; typedef struct { DMD_CONSTEL constel; DMD_CODERATE code_rate; float p_ref; }DMD_SSI_DBM_NORDIGP1; typedef struct { DMD_CONSTEL constel; DMD_CODERATE code_rate; float cn_ref; }DMD_SQI_CN_NORDIGP1; typedef struct { DMD_RFAGC_SSI *pRfagcSsi; MS_U16 u16RfagcSsi_Size; DMD_IFAGC_SSI *pIfagcSsi_LoRef; MS_U16 u16IfagcSsi_LoRef_Size; DMD_IFAGC_SSI *pIfagcSsi_HiRef; MS_U16 u16IfagcSsi_HiRef_Size; DMD_IFAGC_ERR *pIfagcErr_LoRef; MS_U16 u16IfagcErr_LoRef_Size; DMD_IFAGC_ERR *pIfagcErr_HiRef; MS_U16 u16IfagcErr_HiRef_Size; }DMD_SSI_TABLE; typedef struct _s_I2C_Interface_func { MS_BOOL (*I2C_WriteBytes)(MS_U16 u16BusNumSlaveID, MS_U8 u8addrcount, MS_U8* pu8addr, MS_U16 u16size, MS_U8* pu8data); MS_BOOL (*I2C_ReadBytes)(MS_U16 u16BusNumSlaveID, MS_U8 u8AddrNum, MS_U8* paddr, MS_U16 u16size, MS_U8* pu8data); }s_I2C_Interface_func; //------------------------------------------------------------------------------------------------- // Function and Variable //------------------------------------------------------------------------------------------------- //------------------------------------------------------------------------------------------------- /// Register DEMOD bank address /// @ingroup COMMON_BASIC /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- DLL_PUBLIC MS_BOOL MDrv_DMD_PreInit(void); //------------------------------------------------------------------------------------------------- /// Enable RF AGC Tristate /// @ingroup COMMON_BASIC /// @param bEnable \b IN: Enable as TRUE /// @return : NULL //------------------------------------------------------------------------------------------------- DLL_PUBLIC void MDrv_DMD_RFAGC_Tristate(MS_BOOL bEnable); //------------------------------------------------------------------------------------------------- /// Enable IF AGC Tristate /// @ingroup COMMON_BASIC /// @param bEnable \b IN: Enable as TRUE /// @return : NULL //------------------------------------------------------------------------------------------------- DLL_PUBLIC void MDrv_DMD_IFAGC_Tristate(MS_BOOL bEnable); //------------------------------------------------------------------------------------------------- /// Get TS clock rate /// @ingroup COMMON_BASIC /// @param fTS_CLK \b OUT: the pointer to TS clock rate /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_TS_GetClockRate(float *fTS_CLK); //------------------------------------------------------------------------------------------------- /// ts output clock frequency and phase configure /// @ingroup COMMON_BASIC /// @param u8cmd_array \b IN: the pointer to TS clock configuration /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- DLL_PUBLIC MS_BOOL MDrv_DMD_TSO_Clk_Control(MS_U8 *u8cmd_array); //------------------------------------------------------------------------------------------------- /// read register data /// @ingroup COMMON_BASIC /// @param u32Reg \b IN: register address /// @param u8Value \b OUT: the pointer to register data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- DLL_PUBLIC MS_BOOL MDrv_DMD_ReadReg(MS_U32 u32Reg, MS_U8 *u8Value); //------------------------------------------------------------------------------------------------- /// write register data /// @ingroup COMMON_BASIC /// @param u32Reg \b IN: register address /// @param u8Value \b IN: register data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- DLL_PUBLIC MS_BOOL MDrv_DMD_WriteReg(MS_U32 u32Reg, MS_U8 u8Value); //------------------------------------------------------------------------------------------------- /// write register data for more than one byte /// @ingroup COMMON_BASIC /// @param u32Reg \b IN: register address /// @param u8Value \b IN: the pointer to data /// @param u8Length \b IN: length of data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_WriteRegs(MS_U32 u32Reg, MS_U8 *u8Value, MS_U8 u8Length); //------------------------------------------------------------------------------------------------- /// Change I2C channel /// @ingroup COMMON_BASIC /// @param ch_num \b IN: I2C channel number /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_I2C_Channel_Change(MS_U8 ch_num); //------------------------------------------------------------------------------------------------- /// Set I2C channel /// @ingroup COMMON_BASIC /// @param ch_num \b IN: I2C channel number /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_I2C_Channel_Set(MS_U8 ch_num); //------------------------------------------------------------------------------------------------- /// Initialize SSPI interface /// @ingroup COMMON_BASIC /// @param u8DeviceNum \b IN: SSPI device number /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_SSPI_Init(MS_U8 u8DeviceNum); //------------------------------------------------------------------------------------------------- /// MIU write data more than one byte per SSPI interface /// @ingroup COMMON_BASIC /// @param u32Addr \b IN: register address /// @param pdata \b IN: the pointer to data /// @param u16Size \b IN: length of data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_SSPI_MIU_Writes(MS_U32 u32Addr, MS_U8 *pdata, MS_U16 u16Size); //------------------------------------------------------------------------------------------------- /// MIU read data more than one byte per SSPI interface /// @ingroup COMMON_BASIC /// @param u32Addr \b IN: register address /// @param pdata \b IN: the pointer to data /// @param u16Size \b IN: length of data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_SSPI_MIU_Reads(MS_U32 u32Addr, MS_U8 *pdata, MS_U16 u16Size); //------------------------------------------------------------------------------------------------- /// MIU write data per SSPI interface /// @ingroup COMMON_BASIC /// @param u16Addr \b IN: register address /// @param data \b IN: register data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_SSPI_RIU_Write8(MS_U16 u16Addr, MS_U8 data); //------------------------------------------------------------------------------------------------- /// MIU read data per SSPI interface /// @ingroup COMMON_BASIC /// @param u16Addr \b IN: register address /// @param pdata \b out: register data /// @return TRUE : succeed /// @return FALSE : fail //------------------------------------------------------------------------------------------------- // DLL_PUBLIC MS_BOOL MDrv_DMD_SSPI_RIU_Read8(MS_U16 u16Addr, MS_U8 *pdata); #ifdef __cplusplus } #endif #endif // _DRV_DVBC_H_