// //****************************************************************************** // MStar Software // Copyright (c) 2010 - 2012 MStar Semiconductor, Inc. All rights reserved. // All software, firmware and related documentation herein ("MStar Software") are // intellectual property of MStar Semiconductor, Inc. ("MStar") and protected by // law, including, but not limited to, copyright law and international treaties. // Any use, modification, reproduction, retransmission, or republication of all // or part of MStar Software is expressly prohibited, unless prior written // permission has been granted by MStar. // // By accessing, browsing and/or using MStar Software, you acknowledge that you // have read, understood, and agree, to be bound by below terms ("Terms") and to // comply with all applicable laws and regulations: // // 1. MStar shall retain any and all right, ownership and interest to MStar // Software and any modification/derivatives thereof. // No right, ownership, or interest to MStar Software and any // modification/derivatives thereof is transferred to you under Terms. // // 2. You understand that MStar Software might include, incorporate or be // supplied together with third party`s software and the use of MStar // Software may require additional licenses from third parties. // Therefore, you hereby agree it is your sole responsibility to separately // obtain any and all third party right and license necessary for your use of // such third party`s software. // // 3. MStar Software and any modification/derivatives thereof shall be deemed as // MStar`s confidential information and you agree to keep MStar`s // confidential information in strictest confidence and not disclose to any // third party. // // 4. MStar Software is provided on an "AS IS" basis without warranties of any // kind. Any warranties are hereby expressly disclaimed by MStar, including // without limitation, any warranties of merchantability, non-infringement of // intellectual property rights, fitness for a particular purpose, error free // and in conformity with any international standard. You agree to waive any // claim against MStar for any loss, damage, cost or expense that you may // incur related to your use of MStar Software. // In no event shall MStar be liable for any direct, indirect, incidental or // consequential damages, including without limitation, lost of profit or // revenues, lost or damage of data, and unauthorized system use. // You agree that this Section 4 shall still apply without being affected // even if MStar Software has been modified by MStar in accordance with your // request or instruction for your use, except otherwise agreed by both // parties in writing. // // 5. If requested, MStar may from time to time provide technical supports or // services in relation with MStar Software to you for your use of // MStar Software in conjunction with your or your customer`s product // ("Services"). // You understand and agree that, except otherwise agreed by both parties in // writing, Services are provided on an "AS IS" basis and the warranty // disclaimer set forth in Section 4 above shall apply. // // 6. Nothing contained herein shall be construed as by implication, estoppels // or otherwise: // (a) conferring any license or right to use MStar name, trademark, service // mark, symbol or any other identification; // (b) obligating MStar or any of its affiliates to furnish any person, // including without limitation, you and your customers, any assistance // of any kind whatsoever, or any information; or // (c) conferring any license or right under any intellectual property right. // // 7. These terms shall be governed by and construed in accordance with the laws // of Taiwan, R.O.C., excluding its conflict of law rules. // Any and all dispute arising out hereof or related hereto shall be finally // settled by arbitration referred to the Chinese Arbitration Association, // Taipei in accordance with the ROC Arbitration Law and the Arbitration // Rules of the Association by three (3) arbitrators appointed in accordance // with the said Rules. // The place of arbitration shall be in Taipei, Taiwan and the language shall // be English. // The arbitration award shall be final and binding to both parties. // //****************************************************************************** // #ifndef __IO_H_ #define __IO_H_ #include "MsCommon.h" #include "drvTypes.h" //#include "byteorder.h" #include "../drvUSBHwCtl.h" #if 0 #define __raw_readb(a) ((U8)UHC_READXBYTE((U32)a-UHC_BASE)) #define __raw_readw(a) ((U16)UHC_READXBYTE((U32)a-UHC_BASE) | \ ((U16)UHC_READXBYTE((U32)a+1-UHC_BASE) << 8) ) #define __raw_readl(a) ((U32)UHC_READXBYTE((U32)a-UHC_BASE) | \ ((U32)UHC_READXBYTE((U32)a+1-UHC_BASE) << 8) | \ ((U32)UHC_READXBYTE((U32)a+2-UHC_BASE) << 16) | \ ((U32)UHC_READXBYTE((U32)a+3-UHC_BASE) << 24) ) #define __raw_readb_Port2(a) ((U8)UHC2_READXBYTE((U32)a-UHC2_BASE)) #define __raw_readw_Port2(a) ((U16)UHC2_READXBYTE((U32)a-UHC2_BASE) | \ ((U16)UHC2_READXBYTE((U32)a+1-UHC2_BASE) << 8) ) #define __raw_readl_Port2(a) ((U32)UHC2_READXBYTE((U32)a-UHC2_BASE) | \ ((U32)UHC2_READXBYTE((U32)a+1-UHC2_BASE) << 8) | \ ((U32)UHC2_READXBYTE((U32)a+2-UHC2_BASE) << 16) | \ ((U32)UHC2_READXBYTE((U32)a+3-UHC2_BASE) << 24) ) //#define writel(value, addr) mwHost20Portw((U32)addr-gUHC_BASE, value) static inline void writel(U32 value, U32 addr) { if ( (addr>=UHC_BASE) && (addr<=UHC_BASE+0x80) ) mwHost20Portw((U32)addr-UHC_BASE, value); else if ( (addr>=UHC2_BASE) && (addr<=UHC2_BASE+0x80) ) mwHost20Portw_Port2((U32)addr-UHC2_BASE, value); } //#define readl(addr) (__raw_readl((U32)addr)) static inline U32 readl(U32 c) { if ( (c>=UHC_BASE) && (c<=UHC_BASE+0x80) ) return __raw_readl((U32)c); else if ( (c>=UHC2_BASE) && (c<=UHC2_BASE+0x80) ) return __raw_readl_Port2((U32)c); } //#define readb(c) __raw_readb((U32)c) static inline U8 readb(U32 c) { if ( (c>=UHC_BASE) && (c<=UHC_BASE+0x80) ) return __raw_readb((U32)c); else if ( (c>=UHC2_BASE) && (c<=UHC2_BASE+0x80) ) return __raw_readb_Port2((U32)c); } //#define readw(c) (__raw_readw((U32)c)) static inline U16 readw(U32 c) { if ( (c>=UHC_BASE) && (c<=UHC_BASE+0x80) ) return __raw_readw((U32)c); else if ( (c>=UHC2_BASE) && (c<=UHC2_BASE+0x80) ) return __raw_readw_Port2((U32)c); } #endif #endif