//<MStar Software>
//******************************************************************************
// MStar Software
// Copyright (c) 2010 - 2012 MStar Semiconductor, Inc. All rights reserved.
// All software, firmware and related documentation herein ("MStar Software") are
// intellectual property of MStar Semiconductor, Inc. ("MStar") and protected by
// law, including, but not limited to, copyright law and international treaties.
// Any use, modification, reproduction, retransmission, or republication of all
// or part of MStar Software is expressly prohibited, unless prior written
// permission has been granted by MStar.
//
// By accessing, browsing and/or using MStar Software, you acknowledge that you
// have read, understood, and agree, to be bound by below terms ("Terms") and to
// comply with all applicable laws and regulations:
//
// 1. MStar shall retain any and all right, ownership and interest to MStar
//    Software and any modification/derivatives thereof.
//    No right, ownership, or interest to MStar Software and any
//    modification/derivatives thereof is transferred to you under Terms.
//
// 2. You understand that MStar Software might include, incorporate or be
//    supplied together with third party`s software and the use of MStar
//    Software may require additional licenses from third parties.
//    Therefore, you hereby agree it is your sole responsibility to separately
//    obtain any and all third party right and license necessary for your use of
//    such third party`s software.
//
// 3. MStar Software and any modification/derivatives thereof shall be deemed as
//    MStar`s confidential information and you agree to keep MStar`s
//    confidential information in strictest confidence and not disclose to any
//    third party.
//
// 4. MStar Software is provided on an "AS IS" basis without warranties of any
//    kind. Any warranties are hereby expressly disclaimed by MStar, including
//    without limitation, any warranties of merchantability, non-infringement of
//    intellectual property rights, fitness for a particular purpose, error free
//    and in conformity with any international standard.  You agree to waive any
//    claim against MStar for any loss, damage, cost or expense that you may
//    incur related to your use of MStar Software.
//    In no event shall MStar be liable for any direct, indirect, incidental or
//    consequential damages, including without limitation, lost of profit or
//    revenues, lost or damage of data, and unauthorized system use.
//    You agree that this Section 4 shall still apply without being affected
//    even if MStar Software has been modified by MStar in accordance with your
//    request or instruction for your use, except otherwise agreed by both
//    parties in writing.
//
// 5. If requested, MStar may from time to time provide technical supports or
//    services in relation with MStar Software to you for your use of
//    MStar Software in conjunction with your or your customer`s product
//    ("Services").
//    You understand and agree that, except otherwise agreed by both parties in
//    writing, Services are provided on an "AS IS" basis and the warranty
//    disclaimer set forth in Section 4 above shall apply.
//
// 6. Nothing contained herein shall be construed as by implication, estoppels
//    or otherwise:
//    (a) conferring any license or right to use MStar name, trademark, service
//        mark, symbol or any other identification;
//    (b) obligating MStar or any of its affiliates to furnish any person,
//        including without limitation, you and your customers, any assistance
//        of any kind whatsoever, or any information; or
//    (c) conferring any license or right under any intellectual property right.
//
// 7. These terms shall be governed by and construed in accordance with the laws
//    of Taiwan, R.O.C., excluding its conflict of law rules.
//    Any and all dispute arising out hereof or related hereto shall be finally
//    settled by arbitration referred to the Chinese Arbitration Association,
//    Taipei in accordance with the ROC Arbitration Law and the Arbitration
//    Rules of the Association by three (3) arbitrators appointed in accordance
//    with the said Rules.
//    The place of arbitration shall be in Taipei, Taiwan and the language shall
//    be English.
//    The arbitration award shall be final and binding to both parties.
//
//******************************************************************************
//<MStar Software>
/* inflate.h -- internal inflate state definition
 * Copyright (C) 1995-2004 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

/* WARNING: this file should *not* be used by applications. It is
   part of the implementation of the compression library and is
   subject to change. Applications should only use zlib.h.
 */

/* define NO_GZIP when compiling if you want to disable gzip header and
   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
   the crc code when it is not needed.  For shared libraries, gzip decoding
   should be left enabled. */
#ifndef NO_GZIP
#  define GUNZIP
#endif

/* Possible inflate modes between inflate() calls */
typedef enum {
    HEAD,       /* i: waiting for magic header */
    FLAGS,      /* i: waiting for method and flags (gzip) */
    TIME,       /* i: waiting for modification time (gzip) */
    OS,         /* i: waiting for extra flags and operating system (gzip) */
    EXLEN,      /* i: waiting for extra length (gzip) */
    EXTRA,      /* i: waiting for extra bytes (gzip) */
    NAME,       /* i: waiting for end of file name (gzip) */
    COMMENT,    /* i: waiting for end of comment (gzip) */
    HCRC,       /* i: waiting for header crc (gzip) */
    DICTID,     /* i: waiting for dictionary check value */
    DICT,       /* waiting for inflateSetDictionary() call */
        TYPE,       /* i: waiting for type bits, including last-flag bit */
        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
        STORED,     /* i: waiting for stored size (length and complement) */
        COPY,       /* i/o: waiting for input or output to copy stored block */
        TABLE,      /* i: waiting for dynamic block table lengths */
        LENLENS,    /* i: waiting for code length code lengths */
        CODELENS,   /* i: waiting for length/lit and distance code lengths */
            LEN,        /* i: waiting for length/lit code */
            LENEXT,     /* i: waiting for length extra bits */
            DIST,       /* i: waiting for distance code */
            DISTEXT,    /* i: waiting for distance extra bits */
            MATCH,      /* o: waiting for output space to copy string */
            LIT,        /* o: waiting for output space to write literal */
    CHECK,      /* i: waiting for 32-bit check value */
    LENGTH,     /* i: waiting for 32-bit length (gzip) */
    DONE,       /* finished check, done -- remain here until reset */
    BAD,        /* got a data error -- remain here until reset */
    MEM,        /* got an inflate() memory error -- remain here until reset */
    SYNC        /* looking for synchronization bytes to restart inflate() */
} inflate_mode;

/*
    State transitions between above modes -

    (most modes can go to the BAD or MEM mode -- not shown for clarity)

    Process header:
        HEAD -> (gzip) or (zlib)
        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
        NAME -> COMMENT -> HCRC -> TYPE
        (zlib) -> DICTID or TYPE
        DICTID -> DICT -> TYPE
    Read deflate blocks:
            TYPE -> STORED or TABLE or LEN or CHECK
            STORED -> COPY -> TYPE
            TABLE -> LENLENS -> CODELENS -> LEN
    Read deflate codes:
                LEN -> LENEXT or LIT or TYPE
                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
                LIT -> LEN
    Process trailer:
        CHECK -> LENGTH -> DONE
 */

/* state maintained between inflate() calls.  Approximately 7K bytes. */
struct inflate_state {
    inflate_mode mode;          /* current inflate mode */
    MS_U32 last;                   /* true if processing last block */
    MS_U32 wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
    MS_U32 havedict;               /* true if dictionary provided */
    MS_U32 flags;                  /* gzip header method and flags (0 if zlib) */
    MS_U32 dmax;              /* zlib header max distance (INFLATE_STRICT) */
    MS_U32 check;        /* protected copy of check value */
    MS_U32 total;        /* protected copy of output count */
    gz_headerp head;            /* where to save gzip header information */
        /* sliding window */
    MS_U32 wbits;             /* log base 2 of requested window size */
    MS_U32 wsize;             /* window size or zero if not using window */
    MS_U32 whave;             /* valid bytes in the window */
    MS_U32 write;             /* window write index */
    MS_U8 FAR *window;  /* allocated sliding window, if needed */
        /* bit accumulator */
    MS_U32 hold;         /* input bit accumulator */
    MS_U32 bits;              /* number of bits in "in" */
        /* for string and stored block copying */
    MS_U32 length;            /* literal or length of data to copy */
    MS_U32 offset;            /* distance back to copy string from */
        /* for table and code decoding */
    MS_U32 extra;             /* extra bits needed */
        /* fixed and dynamic code tables */
    code const FAR *lencode;    /* starting table for length/literal codes */
    code const FAR *distcode;   /* starting table for distance codes */
    MS_U32 lenbits;           /* index bits for lencode */
    MS_U32 distbits;          /* index bits for distcode */
        /* dynamic table building */
    MS_U32 ncode;             /* number of code length code lengths */
    MS_U32 nlen;              /* number of length code lengths */
    MS_U32 ndist;             /* number of distance code lengths */
    MS_U32 have;              /* number of code lengths in lens[] */
    code FAR *next;             /* next available space in codes[] */
    MS_U16 lens[320];   /* temporary storage for code lengths */
    MS_U16 work[288];   /* work area for code table building */
    code codes[ENOUGH];         /* space for code tables */
};