/*
 * (C) Copyright 2025 Rockchip Electronics Co., Ltd
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <dt-bindings/gpio/gpio.h>

/ {
	aliases {
		mmc0 = &emmc;
		mmc1 = &sdmmc0;
	};

	chosen {
		stdout-path = &uart0;
		u-boot,spl-boot-order = &sdmmc0, &spi_nand, &spi_nor, &emmc;
	};

	secure-otp@20b10000 {
		compatible = "rockchip,rv1126b-secure-otp";
		reg = <0x20b10000 0x10000>;
		secure_conf = <0x2022001c>;
		cru_rst_addr = <0x20200a00>;
		mask_addr = <0x20ba0000>;
		key_reader_addr = <0x20b20000>;
		u-boot,dm-spl;
		status = "okay";
	};
};

&gpio0 {
	u-boot,dm-spl;
	status = "okay";
};

&gpio1 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&gpio2 {
	u-boot,dm-spl;
	status = "okay";
};

&gpio3 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&gpio4 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&grf {
	u-boot,dm-spl;
	status = "okay";
};

&ioc_grf {
	u-boot,dm-spl;
	status = "okay";
};

&cru {
	u-boot,dm-spl;
	status = "okay";
};

&crypto {
	u-boot,dm-spl;
	status = "okay";
};

&psci {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&uart0 {
	u-boot,dm-spl;
	status = "okay";
};

&hw_decompress {
	u-boot,dm-spl;
	status = "okay";
};

&rng {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&fspi0 {
	u-boot,dm-spl;
	status = "okay";

	#address-cells = <1>;
	#size-cells = <0>;
	spi_nand: flash@0 {
		u-boot,dm-spl;
		compatible = "spi-nand";
		reg = <0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <80000000>;
	};

	spi_nor: flash@1 {
		u-boot,dm-spl;
		compatible = "jedec,spi-nor";
		label = "sfc_nor";
		reg = <0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <80000000>;
	};
};

&saradc0 {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&sdmmc0 {
	bus-width = <4>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc0_bus4_pins &sdmmc0_cmd_pins &sdmmc0_clk_pins &sdmmc0_detn_pins>;
	u-boot,dm-spl;
	status = "okay";
};

&emmc {
	bus-width = <8>;
	mmc-hs200-1_8v;
	u-boot,dm-spl;
	status = "okay";
};

&sdmmc0_pins {
	u-boot,dm-spl;
};

&sdmmc0_bus4_pins {
	u-boot,dm-spl;
};

&sdmmc0_cmd_pins {
	u-boot,dm-spl;
};

&sdmmc0_clk_pins {
	u-boot,dm-spl;
};

&sdmmc0_detn_pins {
	u-boot,dm-spl;
};

&pinctrl {
	u-boot,dm-spl;
	status = "okay";
};

&pcfg_pull_up {
	u-boot,dm-spl;
};

&pcfg_pull_none {
	u-boot,dm-spl;
};

&usb2phy {
	u-boot,dm-pre-reloc;
	status = "okay";
};

&usb2phy_otg {
	u-boot,dm-pre-reloc;
	status = "okay";
};