projects/build/bspOneUtopia.dxyfile

20 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
22 # http://www.gnu.org/software/libiconv for the list of possible encodings.
26 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
45 # 4096 sub-directories (in 2 levels) under the output directory of each output
47 # Enabling this option can be useful when feeding doxygen a huge amount of
74 # the brief description of a member or function before the detailed description.
82 # in this list, if found as the leading text of the brief description, will be
86 # replaced with the name of the entity): "The $name class" "The $name widget"
109 # inherited members of a class in the documentation of that class as if those
111 # operators of the base classes will not be shown.
122 # can be used to strip a user-defined part of the path. Stripping is
123 # only done if one of the specified strings matches the left-hand part of
130 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
131 # the path mentioned in the documentation of a class, which tells
133 # If left blank only the name of the header file containing the class
146 # will interpret the first line (until the first dot) of a JavaDoc-style
154 # interpret the first line (until the first dot) of a Qt-style
162 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
176 # a new page for each member. If set to NO, the documentation of a member will
177 # be part of the file/class/namespace that contains it.
181 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
186 # This tag can be used to specify a number of aliases that acts
191 # You can put \n's in the value part of an alias to insert newlines.
195 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
197 # For instance, some of the names that are used will be different. The list
198 # of all members will be omitted, etc.
202 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
209 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
215 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
235 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
237 # instead of private inheritance when no explicit protection keyword is present.
251 # tag is set to YES, then doxygen will reuse the documentation of the first
252 # member in the group (if any) for the other members of the group. By default
253 # all members of a group must be documented explicitly.
257 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
258 # the same type (for instance a group of public functions) to be put as a
259 # subgroup of that type (e.g. under the Public Functions section). Set it to
265 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
266 # is documented as struct, union, or enum with the name of the typedef. So
268 # with name TypeT. When disabled the typedef will appear as a member of a file,
275 # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
280 # doxygen to be busy swapping symbols to and from disk most of the time
287 # corresponding to a cache size of 2^16 = 65536 symbols
302 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
307 # If the EXTRACT_STATIC tag is set to YES all static members of a file
325 # If this flag is set to YES, the members of anonymous namespaces will be
328 # name of the file that contains the anonymous namespace. By default
334 # undocumented members of documented classes, files or namespaces.
356 # documentation blocks found inside the body of a function.
384 # will put a list of the files that are included by a file in the documentation
385 # of that file.
395 # will sort the (detailed) documentation of file and class members
402 # brief documentation of file, namespace and class members alphabetically
409 # hierarchy of group names into alphabetical order. If set to NO (the default)
453 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
454 # the initial value of a variable or define consists of for it to appear in
455 # the documentation. If the initializer consists of more lines than specified
456 # here it will be hidden. Use a value of 0 to hide initializers completely.
457 # The appearance of the initializer of individual variables and defines in the
459 # command in the documentation regardless of this setting.
463 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
464 # at the bottom of the documentation of classes and structs. If set to YES the
475 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
481 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
490 # popen()) the command <command> <input-file>, where <command> is the value of
491 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
498 # doxygen. The layout file controls the global structure of the generated output files
502 # of the layout file.
537 # wrong or incomplete parameter documentation, but not about the absence of
542 # The WARN_FORMAT tag determines the format of the warning messages that
546 # $version, which will be replaced by the version of the file (if it could
571 # This tag can be used to specify the character encoding of the source files
575 # the list of possible encodings.
579 # If the value of the INPUT tag contains directories, you can use the
636 # If the value of the INPUT tag contains directories, you can use the
658 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
667 # commands irrespective of the value of the RECURSIVE tag.
681 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
690 # filter if there is a match.  The filters are a list of the form:
707 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
709 # Note: To get rid of all source code in the generated output, make sure also
715 # of functions and classes directly in the documentation.
745 # will point to the HTML generated by the htags(1) tool instead of doxygen
746 # built-in source browser. The htags tool is part of GNU's global source
753 # will generate a verbatim copy of the header file for each class for
763 # of all compounds will be generated. Enable this if the project
764 # contains a lot of classes, structs, unions or interfaces.
769 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
791 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
792 # put in front of it. If left blank `html' will be used as the default path.
816 # fine-tune the look of the HTML output. If the tag is left blank doxygen
823 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
849 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
866 # of the generated HTML documentation.
871 # be used to specify the file name of the resulting .chm file. You
872 # can add a path in front of the file if the result should not be
878 # be used to specify the location (absolute path including file name) of
897 # controls whether a binary table of contents is generated (YES) or a
898 # normal table of contents (NO) in the .chm file.
903 # to the contents of the HTML help documentation and to the tree view.
909 # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
915 # be used to specify the file name of the resulting .qch file.
933 # be used to specify the location of Qt's qhelpgenerator.
940 # top of each HTML page. The value NO (the default) enables the index and
945 # This tag can be used to set the number of enum values (range [1..20])
959 # and Class Hierarchy pages using a tree view instead of an ordered list;
960 # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
962 # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
968 # used to set the initial width (in pixels) of the frame in which the tree
973 # Use this tag to change the font size of Latex formulas included
991 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
992 # put in front of it. If left blank `latex' will be used as the default path.
1019 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1033 # contain links (just like the HTML output) instead of page references
1038 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1046 # running if errors occur, instead of asking the user for help.
1068 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1069 # put in front of it. If left blank `rtf' will be used as the default path.
1081 # contain links (just like the HTML output) instead of page references.
1089 # config file, i.e. a series of assignments. You only have to provide
1094 # Set optional variables used in the generation of an rtf document.
1109 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1110 # put in front of it. If left blank `man' will be used as the default path.
1132 # generate an XML file that captures the structure of
1138 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1139 # put in front of it. If left blank `xml' will be used as the default path.
1145 # syntax of the XML files.
1151 # syntax of the XML files.
1158 # enabling this will significantly increase the size of the XML output.
1168 # that captures the structure of the code including all
1179 # generate a Perl module file that captures the structure of
1195 # tag is set to NO the size of the Perl module output will be much smaller
1200 # The names of the make variables in the generated doxyrules.make file
1249 # are defined before the preprocessor is started (similar to the -D option of
1250 # gcc). The argument of the tag is a list of macros of the form: name
1254 # instead of the = operator.
1261 # this tag can be used to specify a list of macro names that should be expanded.
1280 # Optionally an initial location of the external documentation
1281 # can be added for each tagfile. The format of a tag file without
1313 # The PERL_PATH should be the absolute path and name of the perl script
1314 # interpreter (i.e. the result of `which perl').
1347 # available from the path. This tool is part of Graphviz, a graph visualization
1364 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1386 # class references variables) of the class with other documented classes.
1408 # file showing the direct and indirect include dependencies of the file with
1423 # the time of a run. So in most cases it will be better to enable call graphs
1431 # the time of a run. So in most cases it will be better to enable caller
1437 # will graphical hierarchy of all classes instead of a textual one.
1448 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1465 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1466 # nodes that will be shown in the graph. If the number of nodes in a graph
1469 # number of direct children of the root node in a graph is already larger than
1471 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1475 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1476 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1480 # code bases. Also note that the size of a graph can be further restricted by
1481 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1487 # seem to support this out of the box. Warning: Depending on the platform used,
1488 # enabling this option may lead to badly anti-aliased labels on the edges of
1495 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1501 # generate a legend page explaining the meaning of the various boxes and
1517 # used. If set to NO the values of all tags below this one will be ignored.