projects/build/bspOneUtopia.dxyfile

18 # This tag specifies the encoding used for all characters in the config file
45 # 4096 sub-directories (in 2 levels) under the output directory of each output
48 # source files, where putting all generated files in the same directory would
53 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
55 # information to generate all constant output in the proper language.
67 # include brief member descriptions after the members that are listed in
81 # that is used to form the text in various listings. Each string
82 # in this list, if found as the leading text of the brief description, will be
109 # inherited members of a class in the documentation of that class as if those
116 # path before files name in the file list and in the header files. If set
124 # the path. The tag can be used to show relative paths in the file list.
131 # the path mentioned in the documentation of a class, which tells
132 # the reader which header file to include in order to use a class.
181 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
182 # Doxygen uses this value to replace tabs by spaces in code fragments.
187 # as commands in the documentation. An alias has the form "name=value".
189 # put the command \sideeffect (or @sideeffect) in the documentation, which
190 # will result in a user-defined paragraph with heading "Side Effects:".
191 # You can put \n's in the value part of an alias to insert newlines.
223 # set this tag to YES in order to let doxygen match functions declarations and
243 # will make doxygen to replace the get and set methods by a property in the
250 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
252 # member in the group (if any) for the other members of the group. By default
267 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
270 # be useful for C code in case the coding convention dictates that all compound
276 # determine which symbols to keep in memory and which to flush to disk.
283 # performance by keeping more symbols in memory. Note that the value works on
295 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
303 # will be included in the documentation.
308 # will be included in the documentation.
313 # defined locally in source files will be included in the documentation.
314 # If set to NO only classes defined in header files are included.
319 # methods, which are defined in the implementation section but not in
320 # the interface are included in the documentation.
321 # If set to NO (the default) only methods in the interface are included.
326 # extracted and appear in the documentation as a namespace called
335 # If set to NO (the default) these members will be included in the
342 # undocumented classes that are normally visible in the class hierarchy.
343 # If set to NO (the default) these classes will be included in the various
350 # If set to NO (the default) these declarations will be included in the
370 # file names in lower-case letters. If set to YES upper-case letters are also
372 # in case and if your file system supports case sensitive file names. Windows
378 # will show members with their full class and namespace scopes in the
384 # will put a list of the files that are included by a file in the documentation
390 # is inserted in the documentation for inline members.
396 # alphabetically by member name. If set to NO the members will appear in
403 # by member name. If set to NO (the default) the members will appear in
410 # the group names will appear in their defined order.
426 # commands in the documentation.
432 # commands in the documentation.
438 # commands in the documentation.
444 # \deprecated commands in the documentation.
454 # the initial value of a variable or define consists of for it to appear in
457 # The appearance of the initializer of individual variables and defines in the
459 # command in the documentation regardless of this setting.
469 # If the sources in your project are distributed over multiple directories
471 # in the documentation. The default is NO.
499 # in an output format independent way. The create the layout file that represents
528 # potential errors in the documentation, such as not documenting some
529 # parameters in a documented function, or documenting parameters that
581 # and *.h) to filter out the source-files in the directories. If left
660 # and *.h) to filter out the source-files in the directories. If left
673 # directories that contain image that are included in the documentation (see
709 # Note: To get rid of all source code in the generated output, make sure also
715 # of functions and classes directly in the documentation.
739 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
746 # built-in source browser. The htags tool is part of GNU's global source
770 # in which this list will be split (can be a number in the range [1..20])
774 # In case all classes in a project start with a common prefix, all
775 # classes will be put under the same header in the alphabetical index.
792 # put in front of it. If left blank `html' will be used as the default path.
819 # stylesheet in the HTML output directory as well, or it will be erased!
824 # files or namespaces will be aligned in HTML using tables. If set to
840 # To create a documentation set, doxygen will generate a Makefile in the
841 # HTML output directory. Running make will produce the docset in that
842 # directory and running "make install" will install the docset in
872 # can add a path in front of the file if the result should not be
886 # it should be included in the master .chm file (NO).
898 # normal table of contents (NO) in the .chm file.
946 # that doxygen will group on one line in the generated HTML documentation.
968 # used to set the initial width (in pixels) of the frame in which the tree
974 # as images in the HTML documentation. The default is 10. Note that
992 # put in front of it. If left blank `latex' will be used as the default path.
1009 # save some trees in general.
1020 # packages that should be included in the LaTeX output.
1039 # plain latex in the generated Makefile. Set this option to YES to get a
1047 # This option is also used when generating formulas in HTML.
1053 # in the output.
1069 # put in front of it. If left blank `rtf' will be used as the default path.
1075 # save some trees in general.
1094 # Set optional variables used in the generation of an rtf document.
1110 # put in front of it. If left blank `man' will be used as the default path.
1121 # documented in the real man page(s). These additional files
1139 # put in front of it. If left blank `xml' will be used as the default path.
1200 # The names of the make variables in the generated doxyrules.make file
1201 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1212 # evaluate all C-preprocessor directives found in the sources and include
1218 # names in the source code. If set to NO (the default) only conditional
1219 # compilation will be performed. Macro expansion can be done in a controlled
1231 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1242 # patterns (like *.h and *.hpp) to filter out the header-files in the
1262 # The macro definition that is found in the sources will be used.
1291 # If a tag file is not located in the directory in which doxygen
1302 # in the class index. If set to NO only the inherited external classes
1308 # in the modules index. If set to NO, only the current project's groups will
1323 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1333 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1335 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1348 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1354 # directory and reference it in all dot files that doxygen generates. This
1358 # which can be done by putting it in a standard location or by setting the
1396 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1423 # the time of a run. So in most cases it will be better to enable call graphs
1431 # the time of a run. So in most cases it will be better to enable caller
1443 # in a graphical way. The dependency relations are determined by the #include
1444 # relations between the files in the directories.
1455 # found. If left blank, it is assumed the dot tool can be found in the path.
1460 # contain dot files that are included in the documentation (see the
1466 # nodes that will be shown in the graph. If the number of nodes in a graph
1469 # number of direct children of the root node in a graph is already larger than
1494 # files in one run (i.e. multiple -o and -T options on the command line). This
1502 # arrows in the dot generated graphs.