609     MS_U32 temp;  in MDrv_UsbDeviceConnect()
628             temp = ehci_readl((U32)&ehci->regs->bus_control);  in MDrv_UsbDeviceConnect()
629             temp &= ~0x80;  in MDrv_UsbDeviceConnect()
630             ehci_writel(temp, (U32)&ehci->regs->bus_control);  in MDrv_UsbDeviceConnect()
1230     U32 temp;  in InitUSBIntr()  local
1243     temp = (HOST20_USBINTR_IntOnAsyncAdvance |  in InitUSBIntr()
1250     ehci_writel (temp, (U32)&ehci->regs->intr_enable);      in InitUSBIntr()
1252     temp = ehci_readb((U32)&ehci->regs->status);  in InitUSBIntr()
1253     ehci_writel (temp, (U32)&ehci->regs->status); //clear all pending interrupt  in InitUSBIntr()
1255     temp = ehci_readb((U32)&ehci->regs->bus_control);  in InitUSBIntr()
1256     temp|= INT_POLAR;  in InitUSBIntr()
1257     ehci_writel (temp, (U32)&ehci->regs->bus_control); // set interrupt polarity high  in InitUSBIntr()
1595     U32 temp;  in InitUSBIntr_EX()  local
1598     temp = (HOST20_USBINTR_IntOnAsyncAdvance |  in InitUSBIntr_EX()
1605     ehci_writel (temp, (U32)&ehci->regs->intr_enable);      in InitUSBIntr_EX()
1607     temp = ehci_readb((U32)&ehci->regs->status);  in InitUSBIntr_EX()
1608     ehci_writel (temp, (U32)&ehci->regs->status); //clear all pending interrupt  in InitUSBIntr_EX()
1611     temp = ehci_readb((U32)&ehci->regs->bus_control);  in InitUSBIntr_EX()
1612     temp|= INT_POLAR;  in InitUSBIntr_EX()
1613     ehci_writel (temp, (U32)&ehci->regs->bus_control);  in InitUSBIntr_EX()
1628     U32 temp, temp2;      in Usb_host_Init_EX()  local
1635     temp = ehci_readl((U32)&ehci->regs->command);  in Usb_host_Init_EX()
1636     temp |= CMD_RESET;  in Usb_host_Init_EX()
1637     ehci_writel (temp, (U32)&ehci->regs->command); //host controller reset  in Usb_host_Init_EX()
1668     temp = (ehci_readl((U32)&ehci->regs->bus_control) >> 9) & 0x3;  in Usb_host_Init_EX()
1669     diag_printf("speed: %x\n", temp);  in Usb_host_Init_EX()
1674     if (temp == 2) // high speed  in Usb_host_Init_EX()
1689     temp = ehci_readl((U32)&ehci->regs->command) & 0xfffffff3;  in Usb_host_Init_EX()
1690     temp |= (HOST20_USBCMD_FrameListSize_256 << 2);  in Usb_host_Init_EX()
1691     ehci_writel (temp, (U32)&ehci->regs->command);  in Usb_host_Init_EX()
1693     temp = (HOST20_USBINTR_IntOnAsyncAdvance |  in Usb_host_Init_EX()
1700     ehci_writel (temp, (U32)&ehci->regs->intr_enable);          in Usb_host_Init_EX()
1715     MS_U32 temp;  in MDrv_UsbDeviceConnect_EX()  local
1733             temp = ehci_readl((U32)&ehci->regs->bus_control);  in MDrv_UsbDeviceConnect_EX()
1734             temp &= ~0x80;  in MDrv_UsbDeviceConnect_EX()
1735             ehci_writel(temp, (U32)&ehci->regs->bus_control);  in MDrv_UsbDeviceConnect_EX()
2059     S32 temp = -1;  in Create_USB_Mutex()  local
2062         temp = _s32MutexUSB = MsOS_CreateMutex(E_MSOS_FIFO, "USB_MUTEX", MSOS_PROCESS_SHARED);  in Create_USB_Mutex()
2064 …temp =  _s32MutexUSB_Port2 = MsOS_CreateMutex(E_MSOS_FIFO, "USB_MUTEX_PORT2", MSOS_PROCESS_SHARED);  in Create_USB_Mutex()
2066 … temp = _s32MutexUSB_Port1 = MsOS_CreateMutex(E_MSOS_FIFO, "USB_MUTEX_PORT1", MSOS_PROCESS_SHARED);  in Create_USB_Mutex()
2068 … temp = _s32MutexUSB_Port3 = MsOS_CreateMutex(E_MSOS_FIFO, "USB_MUTEX_PORT3", MSOS_PROCESS_SHARED);  in Create_USB_Mutex()
2069     return temp;  in Create_USB_Mutex()