Lines Matching refs:after

164 …ents length of valid data in the buffer space. If the length changes to 0 after the decode_put_pac…
187 …py_init, the memory allocated during the copying process will be released after the copy is comple…
369 …ze to be allocated from the decoder. This command is called usually right after mpp_init and befor…
417 …waiting for dpb full to output the frame. If the current frame is decoded after the I frame but di…
421 The reset interface is used to restore the decoder to the state after normal initialization.
423 …l enter the EOS state after processing the last packet of data, and will no longer receive and pro…
441 …emory space needs to be handed over to user, and released back to decoder after user completes his…
445 …MPP decoder directly. The user obtains the decoder output image and releases it directly after use.
541 …get_packet interface. The timing of the header information acquisition is after the SET_RC_CFG/SET…
545 … If you need to remove the start code, you can copy it start with the address after the start code.
683 …after the basic configuration of the encoder is completed. The user needs to manually release the …
710 … behavior of the rate control strategy plug-in. The rate control strategy after registration can b…
750 …DData.It needs to be configured every frame, and needs to be reconfigured after each frame is enco…
826 …orts MPEG2/4, H.263/4/5, and VP8/9 decoding. The number after the id is the parameter value after …
999 | osd_mode          | RK_U32 | OSD palette mode, effective only after enabling OSD palette. 0: Defa…