Lines Matching refs:environment
4 prompt "Select the location of the environment"
28 At present the environment can be stored in only one place. Use this
31 partition on the device) or a filesystem (where the environment
37 Define this if you don't want to or can't have an environment stored
41 environment.
54 environment area within the total memory of your EEPROM.
62 EEPROM, which holds the environment, is on the I2C bus.
71 EEPROM which holds the environment, is reached over
79 Define this if you want to use the FAT file system for the environment.
82 This must be enabled. Otherwise it cannot save the environment file.
89 environment.
91 a) The environment occupies one whole flash sector, which is
97 such a case you would place the environment in one of the
100 environment in one of the last sectors, leaving a gap
101 between U-Boot and the environment.
105 Offset of environment data (variable area) to the
115 the flash sector containing the environment (instead of
120 Size of the sector containing the environment.
125 the environment.
131 of this flash sector for the environment. This saves
132 memory for the RAM copy of the environment.
135 when your environment is "embedded" within U-Boot code,
139 updating the environment in flash makes it always
148 a redundant copy of the environment data, so that there is
161 environment.
165 Specifies which MMC device the environment is stored in.
169 Specifies which MMC partition the environment is stored in. If not
176 These two #defines specify the offset and size of the environment
184 environment placed at the very end of the partition, to leave the
193 hold a redundant copy of the environment data. This provides a
214 environment.
219 These two #defines specify the offset and size of the environment
226 size used to hold a redundant copy of the environment data, so
233 Specifies the length of the region in which the environment
242 environment from block zero's out-of-band data. The
253 environment.
259 want to use for environment. It is assumed that this memory
267 Define this if you want to put your local device's environment in
274 want to use for environment. It is assumed that this memory
283 want to use for the local device's environment.
289 environment area within the remote memory space. The
290 local device can get the environment from remote memory
298 want to use for the environment.
304 environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
314 size used to hold a redundant copy of the environment data, so
337 environment. This has the benefit of wear-leveling the environment
347 environment in.
352 the environment in. This will enable redundant environments in UBI.
366 environment.
371 These two #defines specify the offset and size of the environment
378 hold a redundant copy of the environment data. This provides a
391 Specifies which MMC partition the environment is stored in. If not
398 bool "AES-128 encryption for stored environment (DEPRECATED)"
400 Enable this to have the on-device stored environment be encrypted
406 string "Name of the block device for the environment"
439 environment.
462 The environment white list.
465 bool "Enable environment for the Image memory layout"
476 The environment settings of Image memory layout.
493 Size of the environment storage area
505 Name of the volume that you want to store the environment in.
524 Size of the environment storage area