Lines Matching refs:used
108 disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
111 save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
112 dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
127 On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
128 On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
130 On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
148 On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
149 On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
163 On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
166 On A83T boards dcdc4 is used for VDD-GPU.
176 should be 1.5V, 1.35V if DDR3L is used.
187 On A31 boards aldo1 is often used to power the wifi module.
188 On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
190 On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and
205 On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
206 On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
222 On A80 boards aldo3 is normally not used.
241 disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
243 used to power the wifi.
294 disable eldo3. On some A31(s) tablets it might be used to supply
307 used.
339 is typically used to power the VDD-CPU and should be 1200mV.
348 GPIO and it is commonly used with the OMAP3 family of processors