Kconfig - OpenGrok cross reference for /rk3399_rockchip-uboot/drivers/power/Kconfig

43 	Select this to enable support for the axp152 pmic found on most
51 	Select this to enable support for the axp209 pmic found on most
59 	Select this to enable support for the axp221/axp223 pmic found on most
67 	Say y here to enable support for the axp809 pmic found on A80 boards.
74 	Say y here to enable support for the axp818 pmic found on
81 	Select this to enable support for the SY8106A pmic found on some
107 	Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
110 	sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
124 	Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
142 	Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
160 	Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
173 	Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
185 	Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
187 	On A31 boards aldo1 is often used to power the wifi module.
201 	Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
217 	Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
231 	Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
240 	Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
242 	to power the ethernet phy. On A23, A33 and A80 boards this is often
243 	used to power the wifi.
251 	Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
260 	Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
268 	Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
276 	Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
284 	Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
293 	Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
294 	disable eldo3. On some A31(s) tablets it might be used to supply
304 	Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
314 	Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
323 	Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
331 	Enable to turn on axp pmic sw.
338 	Set the voltage (mV) to program the SY8106A pmic VOUT1. This
339 	is typically used to power the VDD-CPU and should be 1200mV.