Lines Matching refs:client

9 designated client devices. Again, each client device must be represented as a
12 For a client device to operate correctly, certain pin controllers must
13 set up certain specific pin configurations. Some client devices need a
16 device is inactive. Hence, each client device can define a set of named
17 states. The number and names of those states is defined by the client device's
21 for client device device tree nodes to map those state names to the pin
24 Note that pin controllers themselves may also be client devices of themselves.
27 in a single place, rather than splitting it across multiple client device
30 bindings for the individual client devices in use by that board, i.e. whether
33 == Pinctrl client devices ==
35 For each client device individually, every pin state is assigned an integer
41 Each client device's own binding determines the set of states that must be
76 	/* For a client device requiring named states */
101 Pin controller devices should contain the pin configuration nodes that client