Lines Matching +full:gcc +full:- +full:4
2 --------------------------
5 "Arcadia", a PCI-form-factor carrier card that plugs into a PCI slot,
14 Building U-Boot
15 ---------------
18 chip. You need to use binutils-2.14.tar.bz2 (or newer) from
22 gcc (GCC) 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a)
26 ----------
28 The memory map for U-Boot and linux has been extended w.r.t. the ADS
52 -----------
55 There is a switch which allows the boot-bank to be selected. The switch
58 The U-Boot commands for copying the boot-bank into the secondary bank are
65 U-Boot/kermit commands for downloading an image, then copying
71 send <u-boot-bin-image>
79 U-Boot commands for downloading an image via tftp and flashing
82 tftp 10000 <u-boot.bin.image>
89 secondary bank as the boot-bank.
93 ----------------------
98 user-settable switches on the carrier board are used to configure
104 --------
114 connected.. By convention, the user-specific bits of SW2 are used to
118 --------
124 These are cleverly, er, clearly silkscreened as Slot 1 through 4,
131 --------
139 -------------------------
145 --------
156 --------
164 ----------------------
176 SW3=X000XXXX == CORE:CCB 4:1
188 XXXX0100 == CCB:SYSCLK 4:1
203 ----------
214 Commands for downloading a U-Boot image to memory from edink:
216 env -c
217 time -s 4/8/2004 4:30p
218 dl -k -b -o 100000
221 transmit /binary <u-boot-bin-image>
225 fu -l 100000 fe780000 80000