Lines Matching refs:card

9 These processors can boot directly from NAND, SPI flash and SD card flash
36 The output image can be flashed on the board SPI flash or on a SD card.
38 chosen media devices (0x400 for both SPI flash or SD card).
131 The following example prepare a SD card with u-boot and a FAT partition
138 You should start clearing the partitions table on the SD card. Because
140 that there is no partition at that address. A new SD card is already
144 You can do all steps with fdisk. If the device for the SD card is
154 3. Print card info:
159 In my case, I have a 2 GB card. I need the size to set later the correct value
166 5. Set card geometry
226 9. Copy u-boot.imx on the SD card
235 Now remove your card from the PC and go to the target. If evrything went right,