Lines Matching refs:an

16 - Transfer to an uSD card (see "microSD card" below)
22 The Allwinner A64/H5 firmware consists of three parts: U-Boot's SPL, an
68 controller, typically an on-board eMMC chip. If there is no eMMC or it does
91 Transfer the SPL and the U-Boot FIT image directly to an uSD card:
112 Now connect either an "A to A" USB cable to the upper USB port on the Pine64
113 or get an adaptor and use a regular A-microB cable connected to it. Other
119 This should give you an output starting with: AWUSBFEX soc=00001689(A64) ...
123 Now boot the board without an SD card inserted and you should see the
129 of SPL replacement to get U-Boot up and running from an microSD card.
134 A64 based boards, the H5 uses an incompatible layout which is not supported
139 SD card or an image file:
146 The original boot0 code looks for U-Boot at a certain place on an uSD card