Lines Matching refs:with

6 	- CPU module, with CPU, RAM, flash
7 	- Personality board, with most interfaces (USB, Network,..)
8 	- Debug board with JTAG header.
10 The board is usually delivered with redboot. This howto explains how to boot
11 a linux kernel and how to replace the original bootloader with U-Boot.
13 The board is delivered with Redboot on the NAND flash. It is possible to
14 switch the boot device with the switches SW1-SW2 on the Personality board,
15 and with SW5-SW10 on the Debug board.
35 If the ip address is not set, you can set it with :
42 As default, the board is shipped with these partition tables for NAND
66 Here the resulting script to be defined in RedBoot with fconfig: