Lines Matching refs:image

10 The MPC8536E is capable of booting from NAND flash which uses the image
11 u-boot-nand.bin. This image contains two parts: a first stage image(also
12 call 4K NAND loader and a second stage image. The former is appended to
16 configure the L2SRAM, then copy the second stage image to L2SRAM and jump
17 to it. The second stage image is to configure all the hardware and boot up
25 second stage image. It's set in the board config file when boot from NAND
31 1. Building image
40 3. Flash image
50 initialize the eSPI/eSDHC controller, and loads the mian U-Boot image from
57 to find the image on the memory device, or where copy the main image to. The
65 1. Build image
75 3. Put image to SDCard
118 1. Build image
125 3. Put image to SPI flash