Lines Matching refs:from

7 Boot from NAND:
10 The MPC8536E is capable of booting from NAND flash which uses the image
20 The 4K NAND loader's code comes from the corresponding nand_spl directory,
25 second stage image. It's set in the board config file when boot from NAND
45 Boot from On-chip ROM:
48 The MPC8536E is capable of booting from the on-chip ROM - boot from eSDHC
49 and boot from eSPI. When power on, the porcessor excutes the ROM code to
50 initialize the eSPI/eSDHC controller, and loads the mian U-Boot image from
52 SPI EEPROM, to the target memory, e.g. SDRAM or L2SRAM, then boot from it.
64 For boot from eSDHC:
117 For boot from eSPI: