1173 	uint8_t ep_addr, ep_num;  in dwc3_handle_ep0_xfernotready_event()  local
1177 	ep_num = ep_addr & ADDRESS_MASK;  in dwc3_handle_ep0_xfernotready_event()
1188 			ret = dwc3_epaddr_set_stall(dwc3_handle, ep_num); // OUT EP0  in dwc3_handle_ep0_xfernotready_event()
1201 				*param = ep_num;  in dwc3_handle_ep0_xfernotready_event()
1204 				*param = ep_num;  in dwc3_handle_ep0_xfernotready_event()
1218 					ret = dwc3_epaddr_set_stall(dwc3_handle, ep_num); // OUT EP0  in dwc3_handle_ep0_xfernotready_event()
1236 					ret = dwc3_epaddr_set_stall(dwc3_handle, ep_num); // OUT EP0  in dwc3_handle_ep0_xfernotready_event()
1258 	uint8_t ep_addr, ep_num;  in dwc3_handle_ep_event()  local
1264 	ep_num = ep_addr & ADDRESS_MASK;  in dwc3_handle_ep_event()
1267 		ep = &dwc3_handle->pcd_handle->in_ep[ep_num];  in dwc3_handle_ep_event()
1268 		dwc3_ep = &dwc3_handle->IN_ep[ep_num];  in dwc3_handle_ep_event()
1270 		ep = &dwc3_handle->pcd_handle->out_ep[ep_num];  in dwc3_handle_ep_event()
1271 		dwc3_ep = &dwc3_handle->OUT_ep[ep_num];  in dwc3_handle_ep_event()
1276 		VERBOSE("EP%d%s: Transfer Complete Event=%x\n", ep_num,  in dwc3_handle_ep_event()
1280 			VERBOSE("EP%d%s is an Isochronous endpoint\n", ep_num,  in dwc3_handle_ep_event()
1288 		if ((ep_num == 0U) &&  in dwc3_handle_ep_event()
1290 			VERBOSE("EP%d%s Setup Pending received\n", ep_num,  in dwc3_handle_ep_event()
1295 			   ep_num, ep->is_in ? "IN" : "OUT", dwc3_ep->trb_addr,  in dwc3_handle_ep_event()
1313 			if ((ep_num == 0U) && (ep->xfer_len != ep->xfer_count)) {  in dwc3_handle_ep_event()
1314 				ret = dwc3_epaddr_set_stall(dwc3_handle, ep_num); // OUT EP0  in dwc3_handle_ep_event()
1324 			if ((ep_num != 0U) || (ep->xfer_len == 0U)) {  in dwc3_handle_ep_event()
1325 				*param = ep_num;  in dwc3_handle_ep_event()
1330 			if ((ep_num == 0U) && (ep->xfer_len == 0U)) {  in dwc3_handle_ep_event()
1352 					   ep_num, ep->is_in ? "IN" : "OUT",  in dwc3_handle_ep_event()
1381 				if ((ep_num != 0U) || (ep->xfer_len == 0U)) {  in dwc3_handle_ep_event()
1382 					*param = ep_num;  in dwc3_handle_ep_event()
1387 				if ((ep_num == 0U) && (ep->xfer_len == 0U)) {  in dwc3_handle_ep_event()
1404 		VERBOSE("EP%d%s: Transfer In-Progress %u Event=%x\n", ep_num,  in dwc3_handle_ep_event()
1408 		if (ep_num == 0U) { // ***ToCheck  in dwc3_handle_ep_event()
1428 		VERBOSE("EP%d%s: Transfer Not Ready Event=%x\n", ep_num,  in dwc3_handle_ep_event()
1434 		if (ep_num == 0U) {  in dwc3_handle_ep_event()
1437 				ret = dwc3_epaddr_set_stall(dwc3_handle, ep_num);  // OUT EP0  in dwc3_handle_ep_event()
1469 		VERBOSE("EP%d%s: Endpoint Command Complete Event=%x\n", ep_num,  in dwc3_handle_ep_event()