Lines Matching refs:be

36    Target_SoC should be "imx8mq" for i.MX8MQ SoC.
37    Target_SoC should be "imx8mm" for i.MX8MM SoC.
38    Target_SoC should be "imx8mn" for i.MX8MN SoC.
39    Target_SoC should be "imx8mp" for i.MX8MP SoC.
46 used to generate flash.bin, and flash.bin needs to be flashed into SD card
47 with certain offset for BOOT ROM. the u-boot and imx-mkimage will be upstreamed
48 soon, this doc will be updated once they are ready, and the link will be posted.
59 BL2 will be in the FIT image and SPL will verify it.
60 All of the BL3x will be put in the FIP image. BL2 will verify them.
68 with a DTB overlay. The overlay will be put at PLAT_IMX8M_DTO_BASE with
88 Level-3 PTE mapping is used instead then additional PTEs would be required,
92 family it should rather be avoided creating additional Level-3 mapping and
99 causes those locations not to be filled, which in turn causing EL1&0 software
108 Details on HABv4 usage and implementation could be found in following documents: