docs/getting_started/build-options.rst

86    ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key.
100    ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key.
111    ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key.
315    register during EL2 context save/restore operations. ``FEAT_CSV2_2`` is an
341    Physical Offset register) during EL2 to EL3 context save/restore operations.
354    Read Trap Register) during EL2 to EL3 context save/restore operations.
361    during  EL2 to EL3 context save/restore operations.
385    well as adding HCRX_EL2 to the EL2 context save/restore operations. Its a
464    during EL2 context save/restore operations.``FEAT_VHE`` is a mandatory
471    well as adding TCR2_EL2 to the EL2 context save/restore operations. Its a
498    registers to the EL2 context save/restore operations. This flag can take
567 -  ``ENABLE_FEAT_LS64_ACCDATA``: Numeric value to enable access and save and
880    will be used to save the key.
886 -  ``NS_TIMER_SWITCH``: (deprecated) Enable save and restore for non-secure
887    timer register contents upon world switch. It can take either 0 (don't save
888    and restore) or 1 (do save and restore). 0 is the default. An SPD may set
923    save/restore the DynamIQ Shared Unit's(DSU) Performance Monitoring Unit(PMU)
989    accepted and it will be used to save the key.
992    certificate generation tool to save the keys used to establish the Chain of
993    Trust. Allowed options are '0' or '1'. Default is '0' (do not save).
1001    If ``SAVE_KEYS=1``, only a file is accepted and it will be used to save the key.
1127    it will be used to save the key.
1140    interrupts to TSP allowing it to save its context and hand over
1177    The DSU driver allows save/restore of DSU PMU registers through
1390  For GIC driver versions other than ``1``, deciding when to save and restore GIC
1421    functions. This is required for FVP platform which need to simulate GIC save