docs/getting_started/build-options.rst

258    Default is 0 (disabled)
281    supports the format used by GCC when T32 interworking is disabled. For this
380       If additional traps need to be disabled for specific platforms,
559    The flag is automatically disabled when the target
611    mechanism. The default is 2 but is automatically disabled when the target
629    The default is 0 and it is automatically disabled when the target architecture
697    disabled for production images.
762    If this flag is disabled while the platform which TF-A is compiled for
924    registers when the cluster goes through a power cycle. This is disabled by
1016    pages" section in :ref:`Firmware Design`. This flag is disabled by default
1030    flag is disabled by default and NOLOAD sections are placed in RAM immediately
1064    disabled). This configuration supports pre-Armv8.4 platforms (aka not
1068    ``SPMC_AT_EL3`` is enabled. The default value if ``0`` (disabled). This
1069    option cannot be enabled (``1``) when (``SPMC_AT_EL3``) is disabled.
1080    disabled (0) it indicates the SPMC component runs at the S-EL1 execution
1087    (disabled). This option cannot be enabled (``1``) when SPM Dispatcher is
1170    of the Linux kernel on Arm platforms. If this option is disabled, a different
1304   This flag is disabled by default.
1319   and it is automatically disabled when the target architecture is AArch32.
1326   disabled when the target architecture is AArch32.
1346   with the ``ENABLE_FEAT`` mechanism. This flag is disabled by default.
1350   be skipped and non-zero otherwise. By default, this option is disabled which
1355   firmware interface for the BL31 image. By default its disabled (``0``).
1359   ABI. By default its disabled (``0``).
1362   driver(s). By default it is disabled (``0``) because it constitutes an attack
1551    FF-A v1.2 specification. This flag is disabled by default. This flag
1564    The ``FEATURE_DETECTION`` macro is disabled by default.
1570    using MbedTLS 3.x version. It is disabled (``0``) by default.
1582    Default is disabled (0).