Lines Matching refs:serial

154    - **Serial Console**: Establish a serial connection to the Raspberry Pi 3 to
155      view serial output during the boot sequence. The GND, TXD, and RXD pins,
157      are the required pins to establish a serial connection. The recommended way
158      to connect to the board from another system is to use a USB to serial TTL
159      cable to output the serial console in a easy manner.
199 To access the serial console output from the Raspberry Pi 3 you can either:
201    - Follow `instructions`_ to use PuTTY to connect to Raspberry Pi 3 serial console.
209 Once booted the output from the serial console will look like this:
412     In:    serial,usbkbd
413     Out:   serial,vidconsole
414     Err:   serial,vidconsole