docs/design/firmware-design.rst

90 configuration file and/or hardware configuration file as listed below:
92 -  FW_CONFIG - The firmware configuration file. Holds properties shared across
96 -  HW_CONFIG - The hardware configuration file. Can be shared by all Boot Loader
98 -  TB_FW_CONFIG - Trusted Boot Firmware configuration file. Shared between BL1
100 -  SOC_FW_CONFIG - SoC Firmware configuration file. Used by BL31.
101 -  TOS_FW_CONFIG - Trusted OS Firmware configuration file. Used by Trusted OS
103 -  NT_FW_CONFIG - Non Trusted Firmware configuration file. Used by Non-trusted
130    -  For other BL3x images, if the firmware configuration file is loaded by
265 -  If the BL1 dynamic configuration file, ``TB_FW_CONFIG``, is available, then
300    use the image information. If the BL2 image file is not present or if
351 -  If BL1 has passed TB_FW_CONFIG dynamic configuration file in ``arg0``,
1241 required for this feature. The file ``crash_reporting.S`` contains the
1458 calling these functions from outside the file doesn't unexpectedly corrupt
1497 file should also include a call to ``cpu_reset_prologue`` at the start of the
1498 file for errata to work correctly.
1664 sections then the resulting binary file would contain zero bytes in place of
1788 -  ``bl1.map`` link map file provides ``__BL1_RAM_END__`` address.
1789 -  ``bl2.map`` link map file provides ``__BL2_END__`` address.
1790 -  ``bl31.map`` link map file provides ``__BL31_END__`` address.
1791 -  ``bl32.map`` link map file provides ``__BL32_END__`` address.
2117 the offset equals the total size of the FIP file. All ToC entries describe some
2142 The ToC header and entry formats are described in the header file
2143 ``include/tools_share/firmware_image_package.h``. This file is used by both the
2515    ``REGISTER_PUBSUB_EVENT`` macro must be placed in the file