u-boot/include/usb.h

5  * Adapted for U-Boot driver model
8  * SPDX-License-Identifier:	GPL-2.0+
9  * Note: Part of this code has been derived from linux
46  * time for a BULK device to react - some are slow.
93  * struct usb_device - information about a USB device
136 	 * Child devices -  if this is a hub device
150 	/* slot_id - for xHCI enabled devices */
212  * board-specific hardware initialization, called by
213  * usb drivers and u-boot commands
253 int usb_detect_change(void); /* detect if a USB device has been (un)plugged */
282 /* big endian -> little endian conversion */
310  *  - device number (7 bits)
311  *  - endpoint number (4 bits)
312  *  - current Data0/1 state (1 bit)
313  *  - direction (1 bit)
314  *  - speed (2 bits)
315  *  - max packet size (2 bits: 8, 16, 32 or 64)
316  *  - pipe type (2 bits: control, interrupt, bulk, isochronous)
325  *  - max size:		bits 0-1	(00 = 8, 01 = 16, 10 = 32, 11 = 64)
326  *  - direction:	bit 7		(0 = Host-to-Device [Out],
327  *					(1 = Device-to-Host [In])
328  *  - device:		bits 8-14
329  *  - endpoint:		bits 15-18
330  *  - Data0/1:		bit 19
331  *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
341 		(((dev)->devnum << 8) | ((endpoint) << 15) | \
342 		(dev)->maxpacketsize)
343 #define default_pipe(dev) ((dev)->speed << 26)
372 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
373 #define usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << ep))
374 #define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = \
375 						((dev)->toggle[out] & \
380 #define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep)))
381 #define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep)))
382 #define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep)))
401 				((usb_pipeendpoint(pipe) * 2) - \
405  * struct usb_device_id - identifies USB devices for probing and hotplugging
413  * @idProduct: Vendor-assigned product ID.
414  * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
421  *	or be vendor-specific.  Device classes specify behavior of all
427  *	or be vendor-specific.  Interface classes specify behavior only
432  *	fixed interface numbers to differentiate between vendor-specific
471 	/* Used for vendor-specific interface matches */
496  * struct usb_driver_entry - Matches a driver to its usb_device_ids
509  * USB_DEVICE - macro used to describe a specific usb device
545 #define USB_HUB_PR_HS_NO_TT	0 /* Hi-speed hub without TT */
546 #define USB_HUB_PR_HS_SINGLE_TT	1 /* Hi-speed hub with single TT */
547 #define USB_HUB_PR_HS_MULTI_TT	2 /* Hi-speed hub with multiple TT */
550 /* Transaction Translator Think Times, in bits */
587 	int overcurrent_count[USB_MAXCHILDREN];	/* Over-current counter */
589 	struct usb_tt tt;		/* Transaction Translator */
594  * struct usb_platdata - Platform data about a USB controller
603  * struct usb_dev_platdata - Platform data about a USB device
610  * @udev:	usb-uclass internal use only do NOT use
628 	/* NULL-terminated list of descriptor pointers */
635  * struct usb_bus_priv - information about the USB controller
644  *		has been assigned an address. For XHCI this is not possible
656  * struct usb_emul_platdata - platform data about the USB emulator
668  * struct dm_usb_ops - USB controller operations
682  *		DMA-aligned.
687 	 * control() - Send a control message
697 	 * bulk() - Send a bulk message
704 	 * interrupt() - Send an interrupt message
715 	 * create_int_queue() - Create and queue interrupt packets
733 	 * poll_int_queue() - Poll an interrupt queue for completed packets
748 	 * destroy_int_queue() - Destroy an interrupt queue
754 	 * @return 0 if OK, -ve on error
760 	 * alloc_device() - Allocate a new device context (XHCI)
770 	 * reset_root_port() - Reset usb root port
775 	 * update_hub_device() - Update HCD's internal representation of hub
783 	 * get_max_xfer_size() - Get HCD's maximum transfer bytes
791 #define usb_get_ops(dev)	((struct dm_usb_ops *)(dev)->driver->ops)
792 #define usb_get_emul_ops(dev)	((struct dm_usb_ops *)(dev)->driver->ops)
795  * usb_get_dev_index() - look up a device index number
798  * in U-Boot device addresses are allocated starting at 1 with no gaps.
810  * usb_setup_device() - set up a device ready for use
812  * @dev:	USB device pointer. This need not be a real device - it is
813  *		common for it to just be a local variable with its ->dev
814  *		member (i.e. @dev->dev) set to the parent device and
815  *		dev->portnr set to the port number on the hub (1=first)
819  * @return 0 if OK, -ve on error */
824  * usb_hub_is_root_hub() - Test whether a hub device is root hub or not
832  * usb_hub_scan() - Scan a hub and find its devices
839  * usb_scan_device() - Scan a device on a bus
841  * Scan a device on a bus. It has already been detected and is ready to
849  * @return 0 if OK, -ve on error
855  * usb_get_bus() - Find the bus for a device
867  * usb_select_config() - Set up a device ready for use
869  * This function assumes that the device already has an address and a driver
872  * This re-reads the device and configuration descriptors and sets the
880  * usb_child_pre_probe() - Pre-probe function for USB devices
899  * usb_setup_ehci_gadget() - Set up a USB device as a gadget
909  * usb_stor_reset() - Prepare to scan USB storage devices
928  * usb_find_usb2_hub_address_port() - Get hub address and port for TT setting
940  * usb_alloc_new_device() - Allocate a new device
944  *		driver-specific.
945  * @return 0 if OK, -ENOSPC if we have found out of room for new devices
950  * usb_free_device() - Free a partially-inited device
962  * usb_update_hub_device() - Update HCD's internal representation of hub
968  * @return 0 if OK, -ve on error
973  * usb_get_max_xfer_size() - Get HCD's maximum transfer bytes
980  * @return 0 if OK, -ve on error
985  * usb_emul_setup_device() - Set up a new USB device emulation
996  * @return 0 if OK, -ENOSYS if not implemented, other -ve on error
1002  * usb_emul_control() - Send a control packet to an emulator
1007  * @return 0 if OK, -ve on error
1014  * usb_emul_bulk() - Send a bulk packet to an emulator
1019  * @return 0 if OK, -ve on error
1025  * usb_emul_int() - Send an interrupt packet to an emulator
1030  * @return 0 if OK, -ve on error
1037  * usb_emul_find() - Find an emulator for a particular device
1045  * @return 0 if found, -ve on error
1051  * usb_emul_find_for_dev() - Find an emulator for a particular device
1056  * @return 0 if found, -ve on error
1061  * usb_emul_find_descriptor() - Find a USB descriptor of a particular device
1072  * usb_show_tree() - show the USB device tree