Lines Matching +full:0 +full:x65000000
36 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
43 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
44 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
46 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
78 #define CONFIG_SPL_TEXT_BASE 0x10000000
79 #define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
80 #define CONFIG_SPL_STACK 0x10020000
81 #define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */
82 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000
83 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
86 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
96 #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
98 #define CONFIG_SYS_MONITOR_LEN 0x100000
117 #define CONFIG_SPL_TEXT_BASE 0x10000000
118 #define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */
119 #define CONFIG_SPL_STACK 0x1001f000
123 #define CONFIG_SPL_BSS_START_ADDR 0x8f000000
124 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
127 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
128 #define CONFIG_SYS_MONITOR_LEN 0xa0000
166 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000
171 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
173 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
176 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
179 #define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
180 #define CONFIG_ENV_SPI_BUS 0
181 #define CONFIG_ENV_SPI_CS 0
183 #define CONFIG_ENV_SPI_MODE 0x03
189 #define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
191 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
192 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
196 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
204 func(MMC, mmc, 0) \
205 func(USB, usb, 0)
212 "hwconfig=fsl_ddr:bank_intlv=auto\0" \
213 "ramdisk_addr=0x800000\0" \
214 "ramdisk_size=0x2000000\0" \
215 "fdt_high=0xffffffffffffffff\0" \
216 "initrd_high=0xffffffffffffffff\0" \
217 "fdt_addr=0x64f00000\0" \
218 "kernel_addr=0x65000000\0" \
219 "scriptaddr=0x80000000\0" \
220 "scripthdraddr=0x80080000\0" \
221 "fdtheader_addr_r=0x80100000\0" \
222 "kernelheader_addr_r=0x80200000\0" \
223 "load_addr=0xa0000000\0" \
224 "kernel_addr_r=0x81000000\0" \
225 "fdt_addr_r=0x90000000\0" \
226 "ramdisk_addr_r=0xa0000000\0" \
227 "kernel_start=0x1000000\0" \
228 "kernel_load=0xa0000000\0" \
229 "kernel_size=0x2800000\0" \
230 "console=ttyS0,115200\0" \
231 MTDPARTS_DEFAULT "\0" \
233 "boot_scripts=ls1046ardb_boot.scr\0" \
234 "boot_script_hdr=hdr_ls1046ardb_bs.out\0" \
244 "done\0" \
251 "\0" \
259 "source ${scriptaddr}\0" \
260 "installer=load mmc 0:2 $load_addr " \
262 "bootm $load_addr#ls1046ardb\0" \
265 "$kernel_start $kernel_size && bootm $load_addr#$board\0"