include/configs/ls1043a_common.h

38 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
45 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
46 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
48 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
71 #define CONFIG_SPL_TEXT_BASE		0x10000000
72 #define CONFIG_SPL_MAX_SIZE		0x17000
73 #define CONFIG_SPL_STACK		0x1001e000
74 #define CONFIG_SPL_PAD_TO		0x1d000
78 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
79 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
80 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
90 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
92 #define CONFIG_SYS_MONITOR_LEN		0x100000
101 #define CONFIG_SPL_TEXT_BASE		0x10000000
102 #define CONFIG_SPL_MAX_SIZE		0x1a000
103 #define CONFIG_SPL_STACK		0x1001d000
106 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
107 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
108 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
109 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
122 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
124 #define CONFIG_SYS_MONITOR_LEN		0x100000
137  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
139 #define CONFIG_SYS_FLASH_BASE			0x60000000
141 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY	0x00000000
193 #define CONFIG_SF_DEFAULT_CS		0
202 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
205 /* Store Fman ucode at offeset 0x900000(72 blocks). */
210  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
212  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
215 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
216 #define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4a08)
219 #define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
220 #define CONFIG_ENV_SPI_BUS		0
221 #define CONFIG_ENV_SPI_CS		0
223 #define CONFIG_ENV_SPI_MODE		0x03
227 #define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
228 #define CONFIG_SYS_QE_FW_ADDR		0x60940000
230 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
231 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
236 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
243 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \
247 			"2m@0x100000(nor_bank0_uboot),"\
248 			"40m@0x1100000(nor_bank0_fit)," \
250 			"2m@0x4100000(nor_bank4_uboot)," \
251 			"40m@0x5100000(nor_bank4_fit),"\
255 			"20m(nand_fit);spi0.0:1m(uboot)," \
262 	func(MMC, mmc, 0) \
263 	func(USB, usb, 0)
269 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
270 	"fdt_high=0xffffffffffffffff\0"		\
271 	"initrd_high=0xffffffffffffffff\0"	\
272 	"fdt_addr=0x64f00000\0"		 	\
273 	"kernel_addr=0x65000000\0"		\
274 	"scriptaddr=0x80000000\0"		\
275 	"scripthdraddr=0x80080000\0"		\
276 	"fdtheader_addr_r=0x80100000\0"		\
277 	"kernelheader_addr_r=0x80200000\0"	\
278 	"kernel_addr_r=0x81000000\0"		\
279 	"fdt_addr_r=0x90000000\0"		\
280 	"load_addr=0xa0000000\0"		\
281 	"kernel_size=0x2800000\0"		\
282 	"console=ttyS0,115200\0"		\
283 	"mtdparts=" MTDPARTS_DEFAULT "\0"	\
285 	"boot_scripts=ls1043ardb_boot.scr\0"	\
286 	"boot_script_hdr=hdr_ls1043ardb_bs.out\0"	\
296 		"done\0"			\
302 		"done;\0"					\
310 		"source ${scriptaddr}\0"			\
311 	"installer=load mmc 0:2 $load_addr "	\
313 		"bootm $load_addr#ls1043ardb\0"	\
316 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
319 		"$kernel_size && bootm $load_addr#$board\0"