configs/km/km_arm.h

43 #define CONFIG_ENV_SPI_BUS		0
44 #define CONFIG_ENV_SPI_CS		0
54 #define CONFIG_SYS_TEXT_BASE	0x07d00000	/* code address before reloc */
55 #define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
56 #define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
57 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
60 #define CONFIG_KM_PNVRAM	0x80000
62 #define CONFIG_KM_PHRAM		0x17F000
64 #define CONFIG_KM_CRAMFS_ADDR	0x2400000
65 #define CONFIG_KM_KERNEL_ADDR	0x2000000	/* 3098KBytes */
66 #define CONFIG_KM_FDT_ADDR	0x23E0000	/*  128KBytes */
71 		" boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
74 	"u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0"		\
76 	"set_fdthigh=setenv fdt_high ${kernelmem}\0"			\
82 		"appended one; fi\0"					\
120 #define BOOTFLASH_START		0x0
134 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
143 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
144 #define CONFIG_PHY_BASE_ADR	0
159 #define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
160 					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
161 					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
162 					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
163 					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
164 					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
176 #define KM_KIRKWOOD_SOFT_I2C_GPIOS	0x0300
179 #define I2C_ACTIVE	__set_direction(KM_KIRKWOOD_SDA_PIN, 0)
181 #define I2C_READ	(kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
189 #define	CONFIG_SYS_I2C_SOFT_SLAVE	0x0
197 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
204 #define CONFIG_ENV_OFFSET		0xc0000     /* no bracets! */
205 #define CONFIG_ENV_SIZE			0x02000     /* Size of Environment */
206 #define CONFIG_ENV_SECT_SIZE		0x10000
209 #define CONFIG_ENV_TOTAL_SIZE		0x20000     /* no bracets! */
211 #define CONFIG_SYS_DEF_EEPROM_ADDR	0x50
214 #define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
215 #define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
217 #define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
225 #define CONFIG_SYS_KW_SPI_MPP	0x0
227 #define FLASH_GPIO_PIN			0x00010000
242 		"sf probe 0;sf erase 0 +${filesize};"			\
243 		"sf write ${load_addr_r} 0 ${filesize};\0"
247 	"newenv=sf probe 0;"						\
249 		__stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
252 	"newenv=setenv addr 0x100000 && "				\
254 		"mw.b ${addr} 0 4 && "					\
258 		" ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
272 	"arch=arm\0"							\
281 #define CONFIG_SYS_SDRAM_BASE		0x00000000
288 #define CONFIG_KM_RESERVED_PRAM 0x801000