Lines Matching refs:environment
4 prompt "Select the location of the environment"
28 At present the environment can be stored in only one place. Use this
31 partition on the device) or a filesystem (where the environment
37 Define this if you don't want to or can't have an environment stored
41 environment.
64 The environment white list.
77 environment area within the total memory of your EEPROM.
85 EEPROM, which holds the environment, is on the I2C bus.
94 EEPROM which holds the environment, is reached over
102 Define this if you want to use the FAT file system for the environment.
105 This must be enabled. Otherwise it cannot save the environment file.
112 environment.
114 a) The environment occupies one whole flash sector, which is
120 such a case you would place the environment in one of the
123 environment in one of the last sectors, leaving a gap
124 between U-Boot and the environment.
128 Offset of environment data (variable area) to the
138 the flash sector containing the environment (instead of
143 Size of the sector containing the environment.
148 the environment.
154 of this flash sector for the environment. This saves
155 memory for the RAM copy of the environment.
158 when your environment is "embedded" within U-Boot code,
162 updating the environment in flash makes it always
171 a redundant copy of the environment data, so that there is
184 environment.
188 Specifies which MMC device the environment is stored in.
192 Specifies which MMC partition the environment is stored in. If not
199 These two #defines specify the offset and size of the environment
207 environment placed at the very end of the partition, to leave the
216 hold a redundant copy of the environment data. This provides a
237 environment.
242 These two #defines specify the offset and size of the environment
249 size used to hold a redundant copy of the environment data, so
256 Specifies the length of the region in which the environment
265 environment from block zero's out-of-band data. The
276 environment.
282 want to use for environment. It is assumed that this memory
290 Define this if you want to put your local device's environment in
297 want to use for environment. It is assumed that this memory
306 want to use for the local device's environment.
312 environment area within the remote memory space. The
313 local device can get the environment from remote memory
321 want to use for the environment.
327 environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
337 size used to hold a redundant copy of the environment data, so
360 environment. This has the benefit of wear-leveling the environment
370 environment in.
375 the environment in. This will enable redundant environments in UBI.
389 environment.
394 These two #defines specify the offset and size of the environment
401 hold a redundant copy of the environment data. This provides a
414 Specifies which MMC partition the environment is stored in. If not
421 bool "AES-128 encryption for stored environment (DEPRECATED)"
423 Enable this to have the on-device stored environment be encrypted
429 string "Name of the block device for the environment"
462 environment.
479 Size of the environment storage area
491 Name of the volume that you want to store the environment in.
510 Size of the environment storage area