Lines Matching +full:panel +full:- +full:mounted
13 to display a command-line console or splash screen. Enabling this
23 to display a command-line console or splash screen. Enabling this
39 This driver can be use with "simple-panel" and
41 (leds/backlight/pwm-backlight.txt)
49 This driver can be used with "simple-panel" and
51 (leds/backlight/gpio-backlight.txt)
54 bool "Support 8-bit-per-pixel displays"
58 Support drawing text and bitmaps onto a 8-bit-per-pixel display.
64 bool "Support 16-bit-per-pixel displays"
68 Support drawing text and bitmaps onto a 16-bit-per-pixel display.
74 bool "Support 32-bit-per-pixel displays"
78 Support drawing text and bitmaps onto a 32-bit-per-pixel display.
90 CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used
97 Sometimes, for example if the display is mounted in portrait
98 mode or even if it's mounted landscape but rotated by 180degree,
110 TrueTrype fonts can provide outline-drawing capability rather than
126 U-Boot to calculate the correct font size.
134 better in low-light situations or to reduce eye strain in some
143 This is a work-around for boards which have 'lcd' in their stdout
145 In this case the console will no-longer work. While it is possible
153 Turn on this option to enable a framebuffer driver when U-Boot is
164 by U-Boot. This can in principle be used with any platform that
179 This option sets the resolution used for the U-Boot framebuffer (and
183 bool "640x400 256-color"
186 bool "640x480 256-color"
189 bool "800x600 16-color"
192 bool "800x600 256-color"
195 bool "1024x768 16-color"
198 bool "1024x768 256-color"
201 bool "1280x1024 16-color"
204 bool "1280x1024 256-color"
222 bool "320x200 32k-color (1:5:5:5)"
225 bool "320x200 64k-color (5:6:5)"
228 bool "320x200 16.8M-color (8:8:8)"
231 bool "640x480 32k-color (1:5:5:5)"
234 bool "640x480 64k-color (5:6:5)"
237 bool "640x480 16.8M-color (8:8:8)"
240 bool "800x600 32k-color (1:5:5:5)"
243 bool "800x600 64k-color (5:6:5)"
246 bool "800x600 16.8M-color (8:8:8)"
249 bool "1024x768 32k-color (1:5:5:5)"
252 bool "1024x768 64k-color (5:6:5)"
255 bool "1024x768 16.8M-color (8:8:8)"
258 bool "1280x1024 32k-color (1:5:5:5)"
261 bool "1280x1024 64k-color (5:6:5)"
264 bool "1280x1024 16.8M-color (8:8:8)"
308 ---help---
316 ---help---
319 interface for driving a MIPI compatible LCD panel. It uses SPI for
326 ---help---
328 anything in the 8MHz-30MHz range and the exact value should be
338 ---help---
343 bool "Hitachi tx18d42vm LVDS LCD panel support"
346 ---help---
349 done they work like a regular LVDS panel.
355 ---help---
365 ---help---
375 ---help---
385 ---help---
389 useful functionality. Such as bi-directional communication with the
390 hardware and LCD panel id retrieval (if the panel can report it). The
397 ---help---
406 This enables library for accessing EDID data from an LCD panel.
412 This enables library in SPL for accessing EDID data from an LCD panel.
429 HLCDC supports video output to an attached LCD panel.
437 some setup handled by U-Boot itself. The graphics adaptor works as
441 resolution can be selected in U-Boot.
449 some setup handled by U-Boot itself. The graphics adaptor works as
453 resolution can be selected in U-Boot.
479 console device and can display stdout output. Within U-Boot is is
486 Tegra20 supports video output to an attached LCD panel as well as
487 other options such as HDMI. Only the LCD is supported in U-Boot.
496 HDMI. At present only eDP is supported by U-Boot. This option
524 output on a bitmap display from an in-memory frame buffer.
535 bit-blit (cf. smiLynxEM)
540 (0-5, cf. cfb_console.c)
566 output from U-Boot will pass through this filter.
569 bool "Set the video as an output-only device"
574 output-only device. The Keyboard driver will not be set up. This
593 the serial port. When this option is enabled, a board-specific
644 rather requires a SoC-specific glue driver to call it), it