Lines Matching full:should

126 	On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
127 	On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
128 	On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
130 	On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
131 	On R40 boards dcdc2 is VDD-CPU and should be 1.1V
145 	should be 1.25V.
146 	On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
147 	On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
148 	On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
149 	On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
150 	On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
162 	On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
163 	On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
164 	On A23 / A33 boards dcdc4 is unused and should be disabled.
165 	On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
176 	should be 1.5V, 1.35V if DDR3L is used.
188 	On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
189 	On A80 boards aldo1 powers the USB hosts and should be 3.0V.
191 	should be 1.8V.
203 	On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V.
204 	On A31 boards aldo2 is typically unused and should be disabled.
205 	On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
206 	On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
209 	LPDDR2, and the codec. It should be 1.8V.
219 	On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
220 	On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
223 	On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
233 	On A10(s) / A13 / A20 boards aldo4 should be 2.8V.
253 	On A80 boards dldo2 normally powers the PL pins and should be 3.0V.
297 	On A80 boards it powers the PM pingroup and should be 3.0V.
306 	On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
316 	On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
339 	is typically used to power the VDD-CPU and should be 1200mV.