Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/u-boot/drivers/power/Kconfig

1 menu "Power"  menu
3 source "drivers/power/domain/Kconfig"
5 source "drivers/power/fuel_gauge/Kconfig"
7 source "drivers/power/io-domain/Kconfig"
9 source "drivers/power/pmic/Kconfig"
11 source "drivers/power/power_delivery/Kconfig"
13 source "drivers/power/regulator/Kconfig"
15 source "drivers/power/dvfs/Kconfig"
17 source "drivers/power/charge/Kconfig"
21 	depends on DM
27 	depends on ARCH_SUNXI
35 	---help---
40 	depends on MACH_SUN5I
42 	---help---
43 	Select this to enable support for the axp152 pmic found on most
48 	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
50 	---help---
51 	Select this to enable support for the axp209 pmic found on most
56 	depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
58 	---help---
59 	Select this to enable support for the axp221/axp223 pmic found on most
64 	depends on MACH_SUN9I
66 	---help---
67 	Say y here to enable support for the axp809 pmic found on A80 boards.
71 	depends on MACH_SUN8I_A83T
73 	---help---
74 	Say y here to enable support for the axp818 pmic found on
79 	depends on MACH_SUNXI_H3_H5
80 	---help---
81 	Select this to enable support for the SY8106A pmic found on some
88 	depends on DM_CHARGE_DISPLAY && DM_FUEL_GAUGE
94 	bool "Enable Rockchip power manager for charge animation"
95 	depends on CHARGE_ANIMATION
98 	  This adds power manage control of devices for low power
103 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
106 	---help---
108 	disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
109 	generic 3.3V IO voltage for external devices like the lcd-panal and
110 	sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
111 	save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
112 	dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
117 	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
123 	---help---
126 	On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
127 	On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
128 	On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
129 	On A80 boards dcdc2 powers the GPU and can be left off.
130 	On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
131 	On R40 boards dcdc2 is VDD-CPU and should be 1.1V
135 	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
141 	---help---
144 	On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
146 	On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
147 	On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
148 	On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
149 	On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
150 	On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
154 	depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
159 	---help---
162 	On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
163 	On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
164 	On A23 / A33 boards dcdc4 is unused and should be disabled.
165 	On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
166 	On A83T boards dcdc4 is used for VDD-GPU.
170 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
172 	---help---
175 	On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
180 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
184 	---help---
187 	On A31 boards aldo1 is often used to power the wifi module.
188 	On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
189 	On A80 boards aldo1 powers the USB hosts and should be 3.0V.
190 	On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and
195 	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
200 	---help---
203 	On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V.
204 	On A31 boards aldo2 is typically unused and should be disabled.
205 	On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
206 	On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
207 	On A80 boards aldo2 powers PB pingroup and camera IO and can be left off.
208 	On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
213 	depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
216 	---help---
219 	On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
220 	On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
222 	On A80 boards aldo3 is normally not used.
223 	On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
228 	depends on AXP209_POWER
230 	---help---
233 	On A10(s) / A13 / A20 boards aldo4 should be 2.8V.
237 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
239 	---help---
241 	disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
242 	to power the ethernet phy. On A23, A33 and A80 boards this is often
243 	used to power the wifi.
247 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
250 	---help---
253 	On A80 boards dldo2 normally powers the PL pins and should be 3.0V.
257 	depends on AXP221_POWER || AXP818_POWER
259 	---help---
265 	depends on AXP221_POWER || AXP818_POWER
267 	---help---
273 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
275 	---help---
281 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
283 	---help---
289 	depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
292 	---help---
294 	disable eldo3. On some A31(s) tablets it might be used to supply
297 	On A80 boards it powers the PM pingroup and should be 3.0V.
301 	depends on AXP818_POWER
303 	---help---
306 	On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
311 	depends on AXP818_POWER
313 	---help---
316 	On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
320 	depends on AXP818_POWER
322 	---help---
327 	bool "axp pmic sw on"
328 	depends on AXP809_POWER || AXP818_POWER
330 	---help---
331 	Enable to turn on axp pmic sw.
335 	depends on SY8106A_POWER
337 	---help---
339 	is typically used to power the VDD-CPU and should be 1200mV.
343 	depends on OMAP34XX
344 	bool "Enable driver for TI TWL4030 power management chip"
346 	---help---
347 	The TWL4030 in a combination audio CODEC/power management with