Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/u-boot/drivers/power/Kconfig

9 source "drivers/power/pmic/Kconfig"
26 	prompt "Select Sunxi PMIC Variant"
34 	bool "board without a pmic"
36 	Select this for boards which do not use a PMIC.
39 	bool "axp152 pmic support"
43 	Select this to enable support for the axp152 pmic found on most
47 	bool "axp209 pmic support"
51 	Select this to enable support for the axp209 pmic found on most
55 	bool "axp221 / axp223 pmic support"
59 	Select this to enable support for the axp221/axp223 pmic found on most
63 	bool "axp809 pmic support"
67 	Say y here to enable support for the axp809 pmic found on A80 boards.
70 	bool "axp818 pmic support"
74 	Say y here to enable support for the axp818 pmic found on
78 	bool "SY8106A pmic support"
81 	Select this to enable support for the SY8106A pmic found on some
102 	int "axp pmic dcdc1 voltage"
107 	Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
116 	int "axp pmic dcdc2 voltage"
124 	Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
134 	int "axp pmic dcdc3 voltage"
142 	Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
153 	int "axp pmic dcdc4 voltage"
160 	Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
169 	int "axp pmic dcdc5 voltage"
173 	Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
179 	int "axp pmic (a)ldo1 voltage"
185 	Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
194 	int "axp pmic (a)ldo2 voltage"
201 	Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
212 	int "axp pmic (a)ldo3 voltage"
217 	Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
227 	int "axp pmic (a)ldo4 voltage"
231 	Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
236 	int "axp pmic dldo1 voltage"
240 	Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
246 	int "axp pmic dldo2 voltage"
251 	Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
256 	int "axp pmic dldo3 voltage"
260 	Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
264 	int "axp pmic dldo4 voltage"
268 	Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
272 	int "axp pmic eldo1 voltage"
276 	Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
280 	int "axp pmic eldo2 voltage"
284 	Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
288 	int "axp pmic eldo3 voltage"
293 	Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
300 	int "axp pmic fldo1 voltage"
304 	Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
310 	int "axp pmic fldo2 voltage"
314 	Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
319 	int "axp pmic fldo3 voltage"
323 	Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
327 	bool "axp pmic sw on"
331 	Enable to turn on axp pmic sw.
334 	int "SY8106A pmic VOUT1 voltage"
338 	Set the voltage (mV) to program the SY8106A pmic VOUT1. This