Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/u-boot/drivers/power/Kconfig

107 	Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
124 	Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
142 	Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
160 	Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
173 	Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
185 	Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
201 	Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
217 	Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
231 	Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
240 	Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
251 	Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
260 	Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
268 	Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
276 	Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
284 	Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
293 	Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
304 	Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
314 	Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
323 	Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
338 	Set the voltage (mV) to program the SY8106A pmic VOUT1. This
339 	is typically used to power the VDD-CPU and should be 1200mV.
340 	Values can range from 680mV till 1950mV.