Lines Matching +full:enable +full:- +full:charge +full:- +full:control
7 source "drivers/power/io-domain/Kconfig"
17 source "drivers/power/charge/Kconfig"
20 bool "Enable driver model for charge display support"
23 This adds a simple uclass for charge display.
35 ---help---
42 ---help---
43 Select this to enable support for the axp152 pmic found on most
50 ---help---
51 Select this to enable support for the axp209 pmic found on most
58 ---help---
59 Select this to enable support for the axp221/axp223 pmic found on most
66 ---help---
67 Say y here to enable support for the axp809 pmic found on A80 boards.
73 ---help---
74 Say y here to enable support for the axp818 pmic found on
80 ---help---
81 Select this to enable support for the SY8106A pmic found on some
87 bool "Enable charge animation"
91 This adds a simple function for charge animation display.
94 bool "Enable Rockchip power manager for charge animation"
98 This adds power manage control of devices for low power
99 during system suspend in charge animation.
106 ---help---
109 generic 3.3V IO voltage for external devices like the lcd-panal and
111 save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
112 dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
123 ---help---
126 On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
127 On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
128 On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
130 On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
131 On R40 boards dcdc2 is VDD-CPU and should be 1.1V
141 ---help---
144 On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
146 On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
147 On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
148 On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
149 On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
150 On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
159 ---help---
162 On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
163 On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
165 On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
166 On A83T boards dcdc4 is used for VDD-GPU.
172 ---help---
175 On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
184 ---help---
188 On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
200 ---help---
206 On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
208 On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
216 ---help---
220 On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
223 On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
230 ---help---
239 ---help---
250 ---help---
259 ---help---
267 ---help---
275 ---help---
283 ---help---
292 ---help---
303 ---help---
306 On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
313 ---help---
316 On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
322 ---help---
330 ---help---
331 Enable to turn on axp pmic sw.
337 ---help---
339 is typically used to power the VDD-CPU and should be 1200mV.
344 bool "Enable driver for TI TWL4030 power management chip"
346 ---help---