Lines Matching full:a80

67 	Say y here to enable support for the axp809 pmic found on A80 boards.
112 	dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
129 	On A80 boards dcdc2 powers the GPU and can be left off.
148 	On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
165 	On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
175 	On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
189 	On A80 boards aldo1 powers the USB hosts and should be 3.0V.
207 	On A80 boards aldo2 powers PB pingroup and camera IO and can be left off.
222 	On A80 boards aldo3 is normally not used.
242 	to power the ethernet phy. On A23, A33 and A80 boards this is often
253 	On A80 boards dldo2 normally powers the PL pins and should be 3.0V.
297 	On A80 boards it powers the PM pingroup and should be 3.0V.