Lines Matching full:serdes

30 #define MIIM_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
149 	/* Initial config/enable of secondary SerDes interface */  in bcm5482_config()
152 	/* Write intial value to secondary SerDes Contol */  in bcm5482_config()
227  * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
233 	int serdes = 0;  in bcm5482_is_serdes()  local
242 	case 0x0f:	/* RGMII-to-SerDes */  in bcm5482_is_serdes()
243 	case 0x12:	/* SGMII-to-SerDes */  in bcm5482_is_serdes()
245 	case 0x16:	/* SerDes-to-Serdes */  in bcm5482_is_serdes()
246 		serdes = 1;  in bcm5482_is_serdes()
250 	case 0x17:	/* SerDes-to-Copper */  in bcm5482_is_serdes()
257 	return serdes;  in bcm5482_is_serdes()
261  * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
305  * Figure out if BCM5482 is in serdes or copper mode and determine link