Lines Matching +full:no +full:- +full:sd
4 bool "MMC/SD/SDIO card support"
10 If you want MMC/SD/SDIO support, you should say Y here and
14 bool "support for MMC/SD write operations"
18 Enable write access to MMC and SD Cards
25 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
26 and non-removable (e.g. eMMC chip) devices are supported. These
27 appear as block devices in U-Boot and can support filesystems such
36 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
37 and non-removable (e.g. eMMC chip) devices are supported. These
38 appear as block devices in U-Boot and can support filesystems such
49 you are reading this help text, you most likely have no idea :-)
51 The MMC framework is reduced to bare minimum to be useful. No malloc
84 block, this provides host support for SD and MMC interfaces, in both
106 bool "Rockchip SD/MMC controller support"
110 This enables support for the Rockchip SD/MMM controller, which is
112 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
113 as removeable SD and micro-SD cards.
155 This selects PCI-based MMC controllers.
174 This enables extended-drain in the MMC/SD/SDIO1I/O and
175 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
183 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
186 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
189 bool "UniPhier SD/MMC Host Controller support"
194 This selects support for the SD/MMC Host Controller on UniPhier SoCs.
229 in the SD Host Controller Standard Specification Version 1.00 .
238 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
240 It is compliant with the SD Host Controller Standard V3.0
244 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
249 This selects the BCM2835 SD/MMC controller.
251 If you have a BCM2835 platform with SD or MMC devices,
257 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
260 This selects the Broadcom set-top box SD/MMC controller.
262 If you have a BCMSTB platform with SD or MMC devices,
268 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
273 This selects the Cadence SD/SDIO/eMMC driver.
296 SD 3.0 specifications. Both SD and eMMC devices are supported.
297 Card-detect gpios are not supported.
312 bool "Microchip PIC32 on-chip SDHCI support"
382 bool "SDHCI platform support for the Tegra SD/MMC Controller"
386 This selects the Tegra SD/MMC controller. If you have a Tegra
387 platform with SD or MMC devices, say Y here.
400 bool "Allwinner sunxi SD/MMC Host Controller support"
404 This selects support for the SD/MMC Host Controller on
417 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
418 and CE-ATA V1.1.
421 bool "Enable to use pre-configure set by pre-loader or bootrom"
423 The MMC is initialized by pre-loader or bootrom, so it is no need to