Lines Matching +full:soc +full:- +full:based

25 	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
26 	  and non-removable (e.g. eMMC chip) devices are supported. These
27 	  appear as block devices in U-Boot and can support filesystems such
36 	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
37 	  and non-removable (e.g. eMMC chip) devices are supported. These
38 	  appear as block devices in U-Boot and can support filesystems such
49 	  you are reading this help text, you most likely have no idea :-)
93 	  This selects support for Samsung Exynos SoC specific extensions to the
95 	  for platforms based on Exynos4 and Exynos5 SoC's.
101 	  This selects support for Hisilicon K3 SoC specific extensions to the
103 	  for platforms based on Hisilicon K3 SoC's.
111 	  based on Designware IP. The device is compatible with at least
113 	  as removeable SD and micro-SD cards.
123 	  for platforms based on Altera SOCFPGA.
147 	  This selects the Freescale SSP MMC controller found on MXS based
155 	  This selects PCI-based MMC controllers.
174 	  This enables extended-drain in the MMC/SD/SDIO1I/O and
175 	  GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
183 	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
186 	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
260 	  This selects the Broadcom set-top box SD/MMC controller.
297 	  Card-detect gpios are not supported.
312 	bool "Microchip PIC32 on-chip SDHCI support"
327 	bool "SDHCI support on Samsung S5P SoC"
343 	  of SoC
350 	bool "SDHCI support for STMicroelectronics SoC"
354 	  on STMicroelectronics STiH410 SoC.
373 	  SoC. Note that this controller does not sit on PCI bus and,
376 	  If you're using an Intel Tangier SoC (available on Intel
418 	  and CE-ATA V1.1.
421 	bool "Enable to use pre-configure set by pre-loader or bootrom"
423 	  The MMC is initialized by pre-loader or bootrom, so it is no need to