Lines Matching refs:In
6 - In case of SD and SPI boot this is done by BootROM code inside the chip
8 - In case of NAND boot FCM supports loading initial 4K code from NAND flash
11 In addition to the above there could be some more methods to initialize the DDR
18 - In very early stage of platform bringup where other boot options are not
20 - In case the support to program the flashes on the board is not available.
29 In this case you can get your test bootloader binary into DDR via tftp
32 support for example AMP boot. In this case also RAM boot loader can be
43 - In case of SD card and SPI flash bootloader this is done by On Chip BootROM inside the Si itself.
44 - In case of NAND boot SPL/TPL code does it with some support from Si itself.
45 - In case of the pure RAM based bootloaders we have to do it by JTAG manually or already existing b…
76 In the 2nd case bootloader has already re-located CCSRBAR to 0xffe00000
94 In the section of the particular SOC, for example P1020, pseudo code