Lines Matching refs:Boot

1 High Assurance Boot (HAB) for i.MX6 CPUs
3 To enable the authenticated or encrypted boot mode of U-Boot, it is
9 In addition, the U-Boot image to be programmed into the
19 which can be used in the Freescale tooling to authenticate U-Boot
22 Image Type:   Freescale IMX Boot Image
37 	This area should include the IVT, the Boot Data the DCD
38 	and U-Boot itself.
43 'hab_status' in U-Boot to retrieve the HAB status and events. This
46 Commands to generate a signed U-Boot using Freescale HAB tools:
47 cst --o U-Boot_CSF.bin < U-Boot.CSF
55 Setup U-Boot Image for Encrypted Boot
57 An authenticated U-Boot image is used as starting point for
58 Encrypted Boot. The image is encrypted by Freescale's Code
61 DCD, and Boot data, remains in plaintext.
66 which needs to be appended to the U-Boot image and specified in
69 The DEK blob is generated by an authenticated U-Boot image with
89 U-Boot image. Note that the blob needs to be transferred back