Lines Matching +full:2 +full:kb
66 of memory in two ranks of 2 GB.
67 - DDRC2: Five separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, ECC, 2 GB
71 - SerDes 2 multiplexing: Two Vitesse (transmit and receive path) cross-point 8x8 switch VSC3308
74 - A Vitesse dual SGMII phy VSC8662 links the B4860 SGMII lines to 2xRJ-45 copper connectors
75 for Stand-alone mode and to the 1000Base-X over AMC MicroTCA connector ports 0 and 2 for
90 - 2 KB internal memory space including
91 - IDT840NT4 clock synthesizer provides B4860 essential clocks : SYSCLK, DDRCLK1,2 and
108 1. Less e6500 cores: 1 cluster with 2 e6500 cores
109 2. Less SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster.
111 4. 2X 4 lane serdes
172 0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB
173 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB
175 0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB
179 0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB
186 0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
190 0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
194 0x0_8000_0000 0x0_FFFF_FFFF DDRC1 2 GB
195 0x0_0000_0000 0x0_7FFF_FFFF DDRC2 2 GB
202 0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB
203 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB
205 0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB
209 0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB
216 0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
220 0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
230 0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
231 0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
232 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
235 0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB
236 0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB
237 0xEDF40000 0xEDFFFFFF U-Boot (alternate bank) 768KB
238 0xEDF20000 0xEDF3FFFF U-Boot env (alternate bank) 128KB
239 0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB
242 0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB
243 0xEC000000 0xEC01FFFF RCW (current bank) 128KB
255 2. FMAN Ucode versions
264 2.To change from vbank2 to vbank0
270 2)Flash vbank2 with b4420 rcw and U-Boot
310 When using [DEFAULT] RCW, which including 2 * 1G SGMII on board and 2 * 1G
332 NAND boot with 2 Stage boot loader
334 PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
336 U-Boot(768 KB) from flash to DDR.
347 Secure boot | 0xFFFC0000 (32KB) |
350 GD, BD | 0xFFFC8000 (4KB) |
352 ENV | 0xFFFC9000 (8KB) |
354 HEAP | 0xFFFCB000 (30KB) |
356 STACK | 0xFFFD8000 (22KB) |
358 U-Boot SPL | 0xFFFD8000 (160KB) |
365 0x140000 0x15FFFF U-Boot env 128KB
366 0x1A0000 0x1BFFFF FMAN Ucode 128KB