Lines Matching full:support
22 bool "Support ADC driver in SPL"
28 bool "Support SPL DECOMP header"
31 Support to build SPL as decomp header.
51 bool "Support returning to the BOOTROM"
53 Some platforms (e.g. the Rockchip RK3368) provide support in their
62 bool "Support SPL loading and booting of RAW images"
66 SPL will support loading and booting a RAW image when this option
71 bool "Support SPL loading and booting of Legacy images"
74 SPL will support loading and booting Legacy images when this option
145 Only ARM64 and PowerPC SPL support relocate now.
148 bool "SPL boot image load support"
151 This enable SPL boot image load support
233 bool "Support CRC32"
236 Enable this to support CRC32 in FIT images within SPL. This is a
243 bool "Support MD5"
246 Enable this to support MD5 in FIT images within SPL. An MD5
255 bool "Support SHA1"
259 Enable this to support SHA1 in FIT images within SPL. A SHA1
267 bool "Support SHA256"
271 Enable this to support SHA256 in FIT images within SPL. A SHA256
297 bool "Support CPU drivers"
299 Enable this to support CPU drivers in SPL. These drivers can set
306 bool "Support crypto drivers"
314 bool "Support hashing drivers"
324 bool "Support DMA drivers"
332 bool "Support misc drivers"
337 build, for those that support building in SPL (not all drivers do).
340 bool "Support an environment"
342 Enable environment support in SPL. The U-Boot environment provides
346 configuration. But some boards use this to support 'Falcon' boot
352 bool "Support save environment"
356 Enable save environment support in SPL after setenv. By default
358 this support in 'Falcon' boot, where SPL need to boot from
366 bool "Support Ethernet"
371 link rather than from an on-board peripheral. Environment support
376 bool "Support EXT filesystems"
378 Enable support for EXT2/3/4 filesystems with SPL. This permits
380 filesystem from within SPL. Support for the underlying block
384 bool "Support FAT filesystems"
387 Enable support for FAT and VFAT filesystems with SPL. This
389 filesystem from within SPL. Support for the underlying block
393 bool "Support FPGAs"
395 Enable support for FPGAs in SPL. Field-programmable Gate Arrays
404 bool "Support GPIO"
406 Enable support for GPIOs (General-purpose Input/Output) in SPL.
415 bool "Support I2C"
417 Enable support for the I2C (Inter-Integrated Circuit) bus in SPL.
428 bool "Support common libraries"
430 Enable support for common U-Boot libraries within SPL. These
437 bool "Support disk paritions"
439 Enable support for disk partitions within SPL. 'Disk' is something
446 option enables whatever partition support has been enabled in
450 bool "Support generic libraries"
452 Enable support for generic U-Boot libraries within SPL. These
459 bool "Support MMC"
462 Enable support for MMC (Multimedia Card) within SPL. This enables
465 support depending on the application (SPL_LIBDISK_SUPPORT). Enable
470 bool "MMC/SD/SDIO card support for write operations in SPL"
478 bool "Support MPC8XXX DDR init"
480 Enable support for DDR-SDRAM (double-data-rate synchronous dynamic
486 bool "Support MTD drivers"
488 Enable support for MTD (Memory Technology Device) within SPL. MTD
503 bool "nand & spi nand & spi nor support for write operations in SPL"
510 bool "Support new Mentor Graphics USB"
512 Enable support for Mentor Graphics USB in SPL. This is a new
518 bool "Support NAND flash"
520 Enable support for NAND (Negative AND) flash in SPL. NAND flash
526 bool "Support networking"
528 Enable support for network devices (such as Ethernet) in SPL.
530 from an on-board peripheral. Environment support is required since
554 bool "Support NOR flash"
556 Enable support for loading U-Boot from memory-mapped NOR (Negative
562 bool "Support XIP"
565 Enable support for execute in place of U-Boot or kernel image. There
571 bool "Support OneNAND flash"
573 Enable support for OneNAND (Negative AND) flash in SPL. OneNAND is
597 bool "Support PCI drivers"
599 Enable support for PCI in SPL. For platforms that need PCI to boot,
601 necessary driver support. This enables the drivers in drivers/pci
605 bool "Support PCH drivers"
607 Enable support for PCH (Platform Controller Hub) devices in SPL.
613 bool "Support loading from PCIE EP"
615 Enable support for PCIE EP driver in SPL. The RC will download the
619 bool "Support POST drivers"
621 Enable support for POST (Power-on Self Test) in SPL. POST is a
628 bool "Support power drivers"
630 Enable support for power control in SPL. This includes support
640 bool "Support PWM driver"
643 Enable support for pwm in SPL. This allows use pwm to control
647 bool "Support booting from RAM"
654 bool "Support booting from preloaded image in RAM"
663 bool "Support RTC drivers"
665 Enable RTC (Real-time Clock) support in SPL. This includes support
672 bool "Support loading from SATA"
674 Enable support for SATA (Serial AT attachment) in SPL. This allows
682 bool "Support serial"
684 Enable support for serial in SPL. This allows use of a serial UART
691 bool "Support SPI flash drivers"
693 Enable support for using SPI flash in SPL, and loading U-Boot from
701 bool "Rockchip NAND FLASH device support"
706 This option enables support for Rockchip NAND FLASH devices.
720 bool "Enable low footprint SPL SPI Flash support"
723 Enable lightweight SPL SPI Flash support that supports just reading
724 data/images from flash. No support to write/erase flash. Enable
726 fledged SPI flash support.
729 bool "SFDP table parsing support for SPI NOR flashes"
732 Enable support for parsing and auto discovery of parameters for
737 bool "Support loading from SPI flash"
739 Enable support for loading next stage, U-Boot or otherwise, from
745 bool "Support SPI drivers"
747 Enable support for using SPI in SPL. This is used for connecting
755 bool "Support USB host drivers"
765 bool "Support loading from USB"
768 Enable support for USB devices in SPL. This allows use of USB
783 bool "Support USB Ethernet drivers"
788 than from an onboard peripheral. Environment support is required
793 bool "Support DFU (Device Firmware Upgrade)"
799 RAM memory device support. The ROM code will load and execute
820 bool "Support SDP (Serial Download Protocol)"
822 Enable Serial Download Protocol (SDP) device support in SPL. This
828 bool "Support watchdog drivers"
830 Enable support for watchdog drivers in SPL. A watchdog is
836 bool "Support loading using Ymodem"
844 bool "Support ARM Trusted Firmware"
852 bool "Support OP-TEE Trusted OS"
873 bool "Support BL33 runs as AArch32 mode"
879 bool "Support OP-TEE Trusted OS"
886 bool "Support AB system boot"
889 Enable this config to support AB system boot.
892 bool "SPL support load rockchip firmware images"
895 This enables SPL support load rockchip firmware images.
1055 bool "Support returning to the BOOTROM (from TPL)"
1057 Some platforms (e.g. the Rockchip RK3368) provide support in their
1066 bool "Support misc drivers in TPL"
1071 build, for those that support building in TPL (not all drivers do).
1074 bool "Support an environment"
1076 Enable environment support in TPL. See SPL_ENV_SUPPORT for details.
1079 bool "Support I2C"
1081 Enable support for the I2C bus in TPL. See SPL_I2C_SUPPORT for
1085 bool "Support common libraries"
1087 Enable support for common U-Boot libraries within TPL. See
1091 bool "Support generic libraries"
1093 Enable support for generic U-Boot libraries within TPL. See
1097 bool "Support not to use spl framework in TPL"
1099 Enable support for not using spl framework in TPL, to reduce the TPL size.
1102 bool "Support MPC8XXX DDR init"
1104 Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See
1108 bool "Support MMC"
1111 Enable support for MMC within TPL. See SPL_MMC_SUPPORT for details.
1114 bool "Support NAND flash"
1116 Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details.
1119 bool "Support serial"
1121 Enable support for serial in TPL. See SPL_SERIAL_SUPPORT for
1125 bool "Support SPI flash drivers"
1127 Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT
1131 bool "Support SPI drivers"
1133 Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for