Lines Matching refs:commands

4 	bool "Support U-Boot commands"
8 	  to enter commands into U-Boot for a wide variety of purposes. It
9 	  also allows scripts (containing commands) to be executed.
10 	  Various commands and command categorys can be indivdually enabled.
11 	  Depending on the number of commands enabled, this can add
37 	  This function is used to support some special U-Boot commands with
132 menu "Info commands"
180 menu "Boot commands"
246 	  Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from
258 	bool "Flattened Device Tree utility commands"
349 menu "Environment commands"
411 menu "Memory commands"
430 	  Provides commands to read and write EEPROM (Electrically Erasable
435 	bool "Enable layout-aware eeprom commands"
439 	  When enabled, additional eeprom sub-commands become available.
449 	  Both commands can either auto detect the layout, or be told which
502 	  Memory commands.
561 menu "Compression commands"
584 menu "Device access commands"
602 	bool "demo - Demonstration commands for driver model"
716 	bool "GPT partition renaming commands"
765 	  For now no commands are provided to examine the trace buffer. The
858 	  MTD commands support.
921 	  peripherals. Sub-commands allow bus enumeration, displaying and
1020 	  This provides various sub-commands to initialise and configure the
1024 	bool "Enable UFS - Universal Flash Subsystem commands"
1027 	  "This provides commands to initialise and configure universal flash
1056 menu "Shell scripting commands"
1092 menu "Network commands"
1099 	  Network commands.
1154 	  Enable MII utility commands.
1184 	  Allow control of L2 Ethernet switch commands. These are supported
1185 	  by the vsc9953 Ethernet driver at present. Sub-commands allow
1193 menu "Misc commands"
1208 	bool "Enable board-specific commands"
1212 	  Some boards have board-specific commands which are only enabled
1214 	  option provides a way to control this. The commands that are enabled
1240 	  Enable the "icache" and "dcache" commands
1269 	  Run commands and summarize execution time.
1329 	  This enables two commands:
1334 	  The two commands are very similar except for the endianness of the
1346 menu "Power commands"
1399 menu "Security commands"
1432 	  Sub-commands:
1474 	  range of commands if provided - see 'tpm help' for details. The
1490 menu "Firmware commands"
1498 	  a number of sub-commands for performing EC tasks such as
1503 menu "Filesystem commands"
1511 	  U-Boot to actually boot the Operating System. Available commands are
1518 	  This provides commands for dealing with CRAMFS (Compressed ROM
1520 	  compressed. Two commands are provided:
1553 	bool "filesystem commands"
1555 	  Enables filesystem commands (e.g. load, ls) that work for multiple
1567 	  Enables commands to support the JFFS2 (Journalling Flash File System
1614 	  This provides two commands which operate on a resierfs filesystem,
1634 	  This provides commands for accessing a YAFFS2 filesystem. Yet
1643 	  This provides commands to accessing a ZFS filesystem, commonly used
1644 	  on Solaris systems. Two sub-commands are provided:
1653 menu "Debug commands"
1680 	  This enables two commands:
1713 	tristate "Enable UBI - Unsorted block images commands"
1724 	  to use U-Boot UBI commands.
1727 	tristate "Enable UBIFS - Unsorted block images filesystem commands"