Lines Matching full:gateworks
1 U-Boot for the Gateworks Ventana Product Family boards
3 This file contains information for the port of U-Boot to the Gateworks
6 The entire Ventana product family (http://www.gateworks.com/product#ventana)
18 The Gateworks Ventana board config uses an SPL build configuration. This
31 To build U-Boot for the Gateworks Ventana product family:
45 The Gateworks Ventana boards support booting from NAND or micro-SD depending
68 The Gateworks Ventana boards with NAND flash have been factory programmed
103 http://trac.gateworks.com/wiki/ventana/bootloader#nand
153 http://trac.gateworks.com/wiki/ventana/bootloader#microsd
160 The Gateworks Ventana board config enables Falcon mode (CONFIG_SPL_OS_BOOT)
167 The Gateworks Ventana board supports Falcon mode for the following boot
181 Gateworks Ventana, we use an EEPROM register on i2c-0 at 0x50:0x00:
201 To prepare a Gateworks Ventana board that boots from NAND flash for Falcon
207 The location offsets defined above are defaults chosen by Gateworks and are
246 http://trac.gateworks.com/wiki/ventana/bootloader/falcon-mode#nand
252 To prepare a Gateworks Ventana board with a primary boot device of micro-SD
262 The location offsets defined above are defaults chosen by Gateworks and are
320 http://trac.gateworks.com/wiki/ventana/bootloader/falcon-mode#microsd