Lines Matching refs:Boot
21 Guide. Of particular interest to U-Boot developers is jumper J22:
39 For U-Boot development, J22.E can be used to switch back-and-forth
40 between two U-Boot images.
67 FE70_0000 Alternative U-Boot image
69 FEF0_0000 U-Boot image
74 FE00_0000 HRCW and U-Boot image
75 FE04_0000 U-Boot environment variables
76 FE80_0000 Alternative HRCW and U-Boot image
81 FE00_0000 HRCW and U-Boot image
82 FE04_0000 U-Boot environment variables
119 the U-Boot image.
121 6.1 Reflash U-Boot Image using U-Boot
127 the U-Boot image.
129 6.2 Using the HRCW to switch between two different U-Boot images on the ITX
131 Because the ITX has 16MB of flash, it is possible to keep two U-Boot
136 When the BMS bit in the HRCW is 0, the ITX will boot the U-Boot image
140 Therefore, just put a U-Boot image at both FE000000 and FEF00000 and
178 U-Boot commands: