Lines Matching +full:cpsw +full:- +full:switch

13 Enabling the D-Cache
15 Net:   cpsw
40 $ make -s all
42 -> now you have the MLO and the u-boot.img file, you can put
51 ARM architecture  --->
52   enable different boot versions for the shc board (enable eMMC)  --->
58   enable different board versions for the shc board (C3 Sample board version)  --->
68 - see also doc/SPL/README.am335x-network
70 - set the jumper into netboot mode
71 - compile the U-boot sources with:
74 - copy the images into your tftp boot directory
75   cp spl/u-boot-spl.bin /tftpboot/.../u-boot-spl-restore.bin
76   cp u-boot.img /tftpboot/.../u-boot-restore.img
77 - power on the board, and you should get something like this:
79 U-Boot SPL 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18)
88 <ethaddr> not set. Validating first E-fuse MAC
89 cpsw
90 cpsw Waiting for PHY auto negotiation to complete... done
95 Using cpsw device
97 Filename 'shc/u-boot-restore.img'.
105 U-Boot 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18 +0200)
111 *** Warning - bad CRC, using default environment
113 Net:   cpsw
114 switch to partitions #0, OK