Barix/ipam390/README.ipam390

18 If this pin is logical 0 (low level):
51 Load address: 0xc0000000
57 NAND erase.part: device 0 offset 0x20000, size 0x160000
58 Erasing at 0x160000 -- 100% complete.
61 NAND write: device 0 offset 0x20000, size 0x78894
79 $ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \
80 	-o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
92 (AIS Parse): Read magic word 0x41504954.
97 (AIS Parse): Processing command 0: 0x5853590D.
100 (AIS Parse): Processing command 1: 0x5853590D.
103 (AIS Parse): Processing command 2: 0x5853590D.
106 (AIS Parse): Processing command 3: 0x5853590D.
109 (AIS Parse): Processing command 4: 0x5853590D.
112 (AIS Parse): Processing command 5: 0x58535901.
115 (AIS Parse): Loaded 326516-Byte section to address 0xC1080000.
116 (AIS Parse): Processing command 6: 0x58535906.
119 (AIS Parse): AIS complete. Jump to address 0xC1080000.
150 NAND read: device 0 offset 0x200000, size 0x400000
166 Argument image is now in RAM at: 0xc0000100
172 device nand0 <davinci_nand.0>, # parts = 6
174  0: u-boot-env          0x00020000	0x00000000	0
175  1: u-boot              0x00160000	0x00020000	0
176  2: bootparms           0x00020000	0x00180000	0
177  3: factory-info        0x00060000	0x001a0000	0
178  4: kernel              0x00400000	0x00200000	0
179  5: rootfs              0x07a00000	0x00600000	0
181 active partition: nand0,0 - (u-boot-env) 0x00020000 @ 0x00000000
184 mtdids  : nand0=davinci_nand.0
185 mtdparts: mtdparts=davinci_nand.0:128k(u-boot-env),1408k(u-boot),128k(bootparms),384k(factory-info)…
188 NAND erase.part: device 0 offset 0x180000, size 0x20000
189 Erasing at 0x180000 -- 100% complete.
193 NAND write: device 0 offset 0x180000, size 0x20000
204 NAND read: device 0 offset 0x200000, size 0x400000
216 Argument image is now in RAM at: 0xc0000100
218 NAND erase.part: device 0 offset 0x180000, size 0x20000
219 Erasing at 0x180000 -- 100% complete.
222 NAND write: device 0 offset 0x180000, size 0x20000